Engineering Jobs in Willingham

Assystem are currently representing the UK's largest car manufacturer in their pursuit for skilled Development Engineers to work at their Centre of Excellence in East Midlands. We are looking for Automotive Engineers with experience gained in Seating / Interior or Chassis Engineering at a Design, Test or Project level.

The successful candidates will work within the Chassis or Seating/Interior teams of the Vehicle Engineering department and be responsible for the prioritising concern resolution and prevention for current, future and past vehicles.

You will be:

Technically qualified to degree or HND level, with 2 – 3 years...

Junior Civil Engineering Measurement Technician

£Salary negotiable

We have a fantastic opportunity for a candidate who is looking to develop their skill set and grow a career within the Telecoms / Civil Engineering Industry.

Our client has been established 29 years with a staff based of 130, mostly Surveyors, Contract Managers, Telecoms/ Civil Engineers

They are looking for a permanent person who again are looking to develop their skill set and grow a career within Telecoms / Civil Engineering company.
To start with the post is more about learning the As Built drawings side and what the company do etc, longer...

From industrial pumping systems, to bespoke software and system integration, Z-Tech offers creative engineering solutions for Power, Control and Information

Z-Tech Control Systems Ltd provides intelligent engineering solutions in Power, Control and Information for industry. Founded in 2000, we have enjoyed successive growth to our current turnover of £6m. We currently employ over 150 quality trained staff and have a number of blue-chip clients. Covering the majority of the UK, our main offices are in Swavesey near Cambridge with bases in London and Edinburgh. We offer solutions for Electrical Engineering, Mechanical Engineering, Software...

From industrial pumping systems, to bespoke software and system integration, Z-Tech offers creative engineering solutions for Power, Control and Information

Z-Tech Control Systems Ltd provides intelligent engineering solutions in Power, Control and Information for industry. Founded in 2000, we have enjoyed successive growth to our current turnover of £6m. We currently employ over 120 quality trained staff and have a number of blue-chip clients. Covering the majority of the UK, our main offices are in Swavesey near Cambridge with bases in London and Edinburgh. We offer solutions for Electrical Engineering, Mechanical Engineering, Software...

You will be required to design, develop and maintain electrical control systems for industrial automation equipment/machinery. Work to required specifications, focusing on economy, safety, reliability, quality and sustainability. Working in a multi-disciplinary team you will be involved in projects from the concept and detail of the design through to implementation, testing and handover. You may also be involved in maintenance programmes.

It is Ideal that applicants have previous experience of electrical control panel design for special purpose machinery/automation with 17th edition

Typical Work Activities Include:
• Identifying...

Test Engineer - Production

We have a fantastic opportunity for a strong and proven Test Engineer to join one of our most prestigious clients based in the Cambridge area.

• As an integral part of a small team, the test engineer will be responsible for correctly testing and validating the design and build, as well as verifying that all equipment meets the customer’s requirements prior to dispatch.
• All ‘Final System Testing’ is done in accordance with the company quality system and the ‘Final Test’ works instruction (a quality approved and controlled document).
• Final system testing will cover a number of different disciplines...

My client, a blue chip FMCG manufacturing organisation is looking to recruit an electrically biased multi-skilled engineer.

You must have experience in either a FOOD / DRINKS / PLASTICS / PHARMACEUTICALS / FMCG manufacturing environment.

Your skills and qualifications will ideally include:

•City & Guilds, ONC in engineering or equivalent desirable (Electrical Bias )
•Significant production line experience, preferably in an fast moving environment
•Familiar with planned preventative maintenance practices
•Experience of PLC systems and packaging machinery preferred

This role involves working a continental...

Electrical Technician

Role Profile
This role is based within our electrical production environment. The Electrical technician will work on all aspects of system looming, panel wiring, and electrical assembly/sub assembly. Working to design schematics, layouts, and be able to handle tight deadlines

Your assignment
• specialist electrical wiring and assembly
• wiring to electrical schematics (knowledge of E Plan is essential)
• general electro-mechanical build and assembly
• Identify and assemble components to control panels
• Wiring systems using E Plan drawings
• Fabrications and fittings interconnecting...

Mechanical Design Engineer – Pro Engineer (5 Month Contract)

Must have solid experience of Pro Engineer

Job Specification:
• Mechanical design of the Company’s bespoke special purpose scientific equipment
• Under the guidance of senior engineers they will provide detailed designs for sub-systems and components
• They will adopt the working practices of a modern engineering office and a companywide quality system

Primary Task List
1. The generation of completed mechanical models for parts and assemblies
2. The generation of detailed drawings suitable for manufacture
3. The creation...

My clients in Cambs are looking for Product Support Specialists - Digital Printing.

These roles are commutable from Newmarket, Royston, Cambridge, Huntingdon, Ely, St. Neots, Biggleswade, Sandy.

Job activities will include some of:
Providing pre- and post-sales technical support to customers including: Web control, workflow, printing ancillaries such as UV curing.
Conducting defined tests for new product developments.
Defining the pre-sales sample process, best practice and ensuring representative samples are produced for the sales force.
Gathering data relating to press performance e.g. colour control, output, technical...

Electro-Mechanical Assembler

£Negotiable

Our client is looking for an experienced Electro-Mechanical Assembler to join their team.

This position is initially temporary for approximately 3 months and is to start ASAP.

Main duties:

You will manufacture various types of assemblies using prepared worksheets, using bonding and fixing techniques i.e. epoxy resins, screws, nuts, drilling etc
To assist, when required, in other areas of the company
To assist with the building of prototypes
To carry out initial testing of piece parts used in production assemblies
To assist in the good housekeeping...

Test Technician

£Negotiable

To configure and test the products produced by the manufacturing unit in accordance with company requirements of quality and delivery.

MAIN DUTIES
Work with the team to deliver Speed, Quality, Cost, H&S and Morale team targets in line with budget and team targets
Participate in team process
Configure products with options, software and ink as required by customer order
Test products in line with current procedures
Fault find electrical, mechanical and fluid systems to component level and carry out repairs as appropriate
Monitor personal time spend on faultfinding and...

Contract Electrical/Proto-Type/Panel Wireperson

£High Rates of Pay Plus Overtime Rates of Time and Half

This is a long term ongoing contract with an immediate start, working for a prestigious client based near Cambridge.

We are looking for an experienced person to perform the following:

Continuity testing of sub assemblies
Assembly of electro-mechanical sub assemblies
Cable preparation for crimping and termination
Point to point wiring to schematics and schedules
Fault finding

Based in Bar Hill.

If you are being considered for this particular role; you will be contacted within the next...

Digital Press Field Product Specialist

Salary Neg plus Excellent Benefits Package

Main Responsibilities:

Our client is investing significant funds in digital printing as a result there is a new opportunity for a Digital Press Product Specialist based in the Cambridge area UK: The role will involve travel through Europe and then the USA as the digital press becomes available in new regions.

Digital Press Product Specialist:
Become a key contact person for the clients current digital press beta site in Belgium
Provide technical support to customer including:
Web control, workflow, printing ancillaries such...

Product Support Specialist

High Plus Excellent Benefits Package

The Product Support Specialist has a functional relationship with the Product Quality Management, Channels and Distributors, Manufacturing, Group Marketing Team, Fluids Department, Software Team, Training Department, The Business Team and Product Support.

To provide support primarily for the our clients V Series Product Range, (and others),
To escalate Product Issues into other parts of the Business to resolve manufacturing issues
To provide early life tracking data for existing and New Product releases
Produce Technical Briefing Notes and documentation...

Overview:
Attractive rates are offered as we actively recruit for a mechanically bias maintenance engineer to engage in a 3 month contract in the Cambridgeshire area. Working for a leading global manufacturer this position will see you carrying out maintenance work on manufacturing equipment.

The Company:
This organisation is at the forefront of manufacturing and production within their field. With their global infrastructure spanning across over 150 countries and net sales of over £1.1 billion last year, they truly are a market leader. Due to a restructure internally, they are now looking to take on a highly skilled mechanical...

Maintenance Supervisor

£Salary Negotiable plus Car and Benefits

Our client is one of the UK's leading manufacturers of home enhancement products for the consumer and commercial markets.

Ideally the candidate will be a qualified Electrical biased maintenance supervisor (Graduate calibre also accepted)
You will be responsible for the organisation, performance and development of the engineering department.
Ensuring safe practices are upheld and promoted whilst maintaining all documentation for preventative maintenance systems to prioritise improvements and optimise plant efficiency.
Excellent interpersonal skills required...

CAD Draughtsperson

Salary negotiable

Purpose of the post:
The main responsibilities includes the design, development and support of new and existing products.

Working for an established quality engineering firm in St Ives, who work with a range of industries to include:
Automotive, Marine, Agricultural etc.

You will produce 2D Mechanical designs from concept stages through to development and production.
Whilst also producing engineering assembly, detailed drawings, BOM's and other related documentation.

Experienced with Solid Works 2D CAD. You will have a knowledge and practical experience of low...

Tool Maker / CNC Miller Programmer

£Negotiable

Permanent position based for an established manufacturing company in St Ives.

Our client is looking for an experienced CNC Miller Programmers to work within their workshop.

You will have experience of using Fanuc controls and must be able to program at a high level, along side of being able to manufacture. repair and maintain press tools.

The successful candidates, will be knowledgeable in CNC milling and programming, be flexible, reliable and have a pleasant personality.

A background in moulding, bonding, precision grinding / engineering ideal

Monday...

Our client is urgently looking for 3D Draughtsperson with SolidWorks experience to work on a contract basis. Candidates must have a sound engineering background, be familiar with steel section and sheet metal fabrications. Duties will include liaison with clients and internal personnel. The role will be based at our client’s offices in Cambridge and working strictly on SolidWorks, the role will involve producing construction drawings including drawings for production.

Rate:NEG

Key Words: SolidWorks 3D Draughtsperson Engineering Steel Section and Steel Fabrications ...