Aerospace Jobs in Cambridgeshire

Automotive, Motor Trade Job: Sales Executive Required in Cambridge, Cambridgeshire

Salary: OTE £35,000 Per Annum
Term: Full Time, Permanent

Motor Trade Jobs / Automotive Vacancies:

Automotive Sales Executive Required in Cambridge.

Our Client is currently looking for Automotive Sales People for their busy motor trade main car dealership in Cambridge.

The aim of the role is to sell both New And Used vehicles, Accessories, Finance, Finance related products, Warranties, with the aim of reaching and exceeding targets.

Main duties include:

*Keeping customers informed of delivery progress and advise...

YOU COULD EARN UP TO £600 P/W AS A DRIVING INSTRUCTOR

To train as a Driving Instructor no previous experience is required.

As a Driving Instructor you can choose when, where and how you work.

By working as a Driving Instructor you will meet new people and teach them a skill for life.

Become a Driving Instructor with the UK’s largest instructor training network, RED Driving School.

WHY BECOME A DRIVING INSTRUCTOR?

The driving instruction industry is at a most exciting time. With the number of lessons taken by each learner to pass the driving test increasing year on year, there is always a demand for professionally...

Our Clients will require experienced qualified contractors to work as Control Panel Techs Fitters on the build of control panels, plant skids, analysing units etc. Setting out panels. Bending and fitting instrument pipe work from drawing 4 - 12mm. Also fitting valves, flow meters etc. Also Panel Electrical an Instrument Techs working on electrical an instrument systems Working mainly in the work shop but may also be required to work on sites depending on work load.Off Shore Survival and Medical Certs would also be an advantage because there may also be off shore work.Quals: CG or NVQ instrumentation or pipe fitting, ideally with swagelock certs...

You will be responsible for the design, development, and maintenance of new and existing products and components as part of the Development Team whose responsibility is to own component and system development activities across the whole mechanical systems team.

The CPPD (Collaborative Product and Process Development) Mechanical Systems Team is dedicated to the delivery of quality, on-time and cost-effective designs. The team is structured into three main systems groups (Air, Fluids and Core), all three of which are supported by design and development teams.

The Role:

You will be responsible for both NPI (New Programme Introduction...

You will be responsible for the design, development, and maintenance of new and existing products and components.

Our Client is a world leader in the development and manufacture of diesel engines and has global responsibility for developing technology to support future product needs.

The Role:

Support the Tier 4 interim aftertreatment development program with the following main objectives:

Test planning and setup (working with V&V, GED and outside test shops).

Data analysis Customer product issues (MyCPI) tracking & management.

Prepare product issues summaries for the management team.

Assist...

You will manage all aspects of ensuring compliance with global regulatory requirements regarding Conformity of Production Auditing (mainly US & EU), and US Defect Reporting requirements for our UK based Emissions Regulations & Conformance (ERC) Team.

They are part of a wider organisation and are responsible for all applicable engine exhaust emissions certification and on-going conformance monitoring for products worldwide. This includes both higher (US, Europe & Japan) and lesser (India, China, S.Korea, etc.) regulated countries.

The Role:

Ensuring adherence to mandatory global Conformity of Production (CoP) requirements...

Job – Engineering Shift Manager (FMCG)
Industry - Food Manufacturing
Salary - £40,000
Shifts – Wednesday to Saturday: 6am till 6pm

Company

My client is one of the world’s largest and most well-known producers, distributors and marketers of premium quality, branded food and pet products for the global retail market.

Role

They seek an experienced Engineering Shift Manager to manage, control and develop all engineering functions including site services/buildings.

You will be responsible for supervising a small team of multi skilled engineers and approved contractors in running the day to day engineering...

Position: Experienced Car Sales Executive
Location: Peterborough, Cambridgeshire
Salary: Competitive

The Company:
Stoneacre is one of the most successful and fastest growing motor groups in the UK with 29 branches across the country. They currently have a fantastic opportunity for an experienced, enthusiastic, highly motivated and professional Car Sales Executive for their busy multi-franchise dealerships in Peterborough.

The Role:

A proven track record in selling cars is essential and you must be:

• Able to deliver first class customer service.
• Target driven.
• A team player.
• Computer literate...

A leader in Aircraft Manufacture and Maintenance are looking for an experience Aircraft Planners to join their team to assist with an exciting new project.

As the Production Planner you must have a background in Aerospace Fabrication Planning and be able to create job cards from customer drawings and processes, using customer specifications.

Skills in the role of Production Planner include:

Collating and interpretation of purchase orders, engineering drawings and specifications.
Keeping stock of materials for minimal waste and maximum production.
Creating jobs cards using MTMS, for shop floor machinists, fitters and...

A leading UK Aerospace Company, specialising in design, development, maintenance and modificaction has a new requirement for a permanent Project Manager or Senior Project Managers. These opportunities are based in Cambridge. The role could also be called Programme Manager or Senior Programme Manager. Description: You will be the point of contact for the customer and be responsible for
planning(MS Project), risk, budgeting, finance,accounts and quality. Person: You will likely have a degree though HNC with good experience will certainly be considered. You will have aerospace or defence sector experience as well as a good knowledge ofplanning...

CNC Turner - Programmer/Setter/Operator is required by long established precision sub-contracting engineering company based in the St. Ives / Huntingdon area. Due to a steadily increasing workload, opportunities have arisen in our Clients Turning department. This is working mainly prototype and low volume high precision runs,

It is essential for applicants to have knowledge of Mazak's Mazatrol, Fanuc or Protrak controls

The ideal candidate would have significant experience of:

Programming, setting and operating CNC Lathes (3 Axis)
Working from drawings.
Inspecting their own work.
Ideally the successful candidates...

CNC Miller - Programmer/Setter/Operator is required by long established precision sub-contracting engineering company based in the St. Ives / Huntingdon area. Due to a steadily increasing workload, opportunities have arisen in our Clients Milling department. This is working mainly prototype and low volume high precision runs,

It is essential for applicants to have knowledge of Mazak's Mazatrol and Heidenhain Control systems.

The ideal candidate would have significant experience of:

Programming, setting and operating vertical and/or horizontal machining centres
Working from drawings.
Inspecting their own work.
The...

Job Details

Car Sales Executive

Job Reference # 2787
Location East London/Essex
Salary £11000 - £65000
Job Description

Are you experienced successful sales professional looking for a new challenge? Our client, the 2nd largest privately owned dealer group in the UK with 71 dealerships within their group have an opportunity for an experienced Car Sales Executive to enhance their dealership in East London/Essex. The successful candiate should be able to demonstrate their ability to provide exceptional customer service and build lasting relationships with customers. You will have a proven track record in achieving...

Automotive, Motor Trade Job: Business Manager Required in Cambridge, Cambridgeshire

Salary: Uncapped earning potential, realistic OTE £40,000+
Term: Full Time, Permanent

Motor Trade Jobs / Automotive Vacancies:

Automotive Business Manager Required in Cambridge.

The opportunity now exists for an enthusiastic, proactive, and professional individual who has a strong working knowledge of F&I to join our client's successful motor trade team as a Business Manager in Cambridge.

Key Success Criteria:
* Sales volumes and margins on finance, mechanical breakdown, warranty and credit protection insurance products...

Company Profile: Our client has been a manufacturer of diesel engines and power solutions for over 75 years, to the highest levels of performance and reliability. They have grown to become one of the leading suppliers of diesel and gas engines in the power solutions market.

Job Location: Cambridgeshire

Job Position: Senior Pro E Mechanical Design Engineer

Job Status: Permanent

Job Profile: An exciting opportunity exists for a Senior Mechanical Design Engineer to work within our Client's Mechanical Systems Design Team and to lead system & component designs from concept through to production.

Essential...

Polisher Grinder - Duties - will include grinding and polishing with grinders and buffers on sheet metal 1 - 2.5mm thick plus plate 6 - 25 mm thick, pipe 2 - 8 inch, vessels - tanks. to high mirror finish. Also other work when required such as assisting with fabrication, drilling, cutting materials on saws or plasma cutter etc. Qualification requirements Able to use grinders, profilers, drills etc. Ideally City Guilds or equivalent in Fabrication Pay will depend on experience an skills 9 - 11 per hr plus basic plus over time rates ...

A world leader in the automotive/defence industry is looking to recruit an Electronic Design Engineer to join an exciting team of engineers developing new engine solutions. This role will give you the opportunity to develop high performance control systems and make a name for yourself in a constantly expanding market.

As the Electronic Design Engineer…

You'll develop high performance electronic solutions for the motorsport and defence markets, typically including engine/chassis control and data acquisition systems. Your areas of Electronic Design Engineer responsibility will include but not be limited to:
*Requirements...

Our client, a well respected Dealer Group currently require an experienced Sales Administrator to join their team.

Working in a busy New and Used car sales department the successful candidate will have a strong knowledge of the Kerridge system and have knowledge of all other areas of the sales administration process. You will need to demostrate a stable career while being a good communicator and able to work on your own initiative or under the guidance of others.

For further details on this Sales Admin or other Motor Trade roles please contact Steve Bushnell at JGA Cambs/ S lincs/ Northants.
...

We are recruiting forour clients in sveral areas in the E Anglia region for

CNC Programmers Millers and Turners

CNC Setter Ops Millers and Turners

CNC Ops

Manual Machinists

Shifts are varied but negotiable as with py

shifts 0800 - 1630, 0600 - 1400, 1400 - 2200 Mon -Fri plus overtime

Will need to have a good engineering back ground be able to read drawings

Ideally able to Program or Set with
HAAS and Mazatrol or Fanuc and Mazak
Applicants with other program exp will aslo be considered.
CNC Ops must have general work shop experience

Pay will depend on quals, expereince, skills...

Materials Engineering Manager
Location: East of England
Salary: Excellent Salary plus Bonus, Pension & Car Allowance

Manage and direct all technical support provided by the team including materials related training, product testing and approval, failure analysis of components, development and evaluation of new components, new materials and suppliers, development and assessment of material related cost reduction activities and drawing consultation and approval.

My client is a Global Organisation with expertise in Materials, Metallurgical and Process Engineering.

Key Responsibilities:

Responsible for 17 other...