Engineering Jobs in Chesterfield

Our client is looking for Mig Welders to ASME 9 Flux core and will be trade tested on site to work at their busy workshop. As a Mig Welder, you would have previous experience working on heavy fabrication structures and low to medium carbon steel, you will be working on up to 12 inches in thickness of steel. As the Mig Welder you will be required to work to Asme 9, flux core and solid wirer.

If you feel you are the right person for this role as a "Mig Welder" and have the above mentioned skills please click the "apply now" button at the bottom of your advert to progress you application further.
Alternatively if this role is not quite...

Our client, a Construction Company in Chesterfield are looking to recruit a Workshop Manager to efficiently manage all resources within the scope of the Contracts Department Workshop.

Key Activities:

1.Health and Safety
a)Ensure safe working practises are adhered to in line with current safe systems of work.
b)Carry out regular safety audits and raise & action appropriate IOs (Improvement Opportunities)
c)Comply with Health & Safety requirements / regulations, including all H&S policies and utilise associated systems and procedures

2.WORKSHOP MANAGEMENT
a)Maintain effective systems for plant and equipment
b...

Temporary Fork Lift Truck driver with Counter Balance licence. Duties include assisting in the warehouse and fork lift operating. Licence must be current for this role.
Spring Personnel Ltd is acting as an Employment Business in relation to this vacancy.

Spring Group plc is an Equal Opportunities employer; we welcome applicants from all backgrounds.
Posting Time ...

Due to our clients increased international activities and rapid growth we have a vacancy at our clients Office in Sheffield. The role is a Mechanical Design Engineer in the Oil and Gas Industry.

Role Summary/Purpose
Reporting to the UK Engineering manager based in the Sheffield office, also operating as an integral
member of the European section of our client (UK & NL). The role involves detailed
engineering, calculations, drawing work of piping and steelwork skids (measurement systems).

Essential Responsibilities
• Piping Design
• Structural Design
• Process Design
• Draughting (AutoCAD / AutoPLANT)
•...

My client, is looking for a time served or apprentice trained general manual machinist, someone who can mill, turn all manual. This position is permanent days. You will be working on small to medium components for electrical and mechanical parts. My client is looking for someone with good all round knowledge of machining, milling and turning, boring and drilling. Over time is available as is an immediate start for the right person. This is an excellent opportunity to join a well established company. ...

MAINTENANCE ELECTRICIAN REQUIRED
CHESTERFIELD
4 ON 4 OFF DAYS AND NIGHTS

We are currently recruiting for an experienced Maintenance Electrician.

Duties will include maintenance and repair of heavy industrial machinery.

The work is on a contract basis, but a permanent position may be available at the end of the 3 months for the right candidate.

Candidates should ideally have heavy industry or manuafacturing industry background and must be apprentice trained/time served.

...

An excellent opportunity has arisen for the role of Internal Sales Manager for a UK based independent Systems Integrator specialising in Process Control, Automation & Management Information Solutions.

The Internal Sales Manager will provide support to the external sales force and to the Sales Director. whilst managing the internal sales team.
In addition to managing their own portfolio, the Sales Manager must be capable of directing all others within the Sales environment.
To develop existing and new systems to improve efficiency within the department.
Provide a first class service to our external sales force.
Planning and...

We are looking for an apprentice trained Combustion & Control Technician to work in a precision machine shop environment in the South Yorkshire area.

THE ROLE:

* Working as part of a multi-disciplined Engineering team to support manufacturing activities to achieve business goals.

* To provide specialist combustion and process control knowledge and expertise as required to support, maintain and develop plant and equipment including electrical and process control systems, combustion control systems, communications systems, co-ordination and execution of equipment calibration and survey requirements.

* Implement...

Working for a well established, successful firm within theChesterfield area, we are looking to create a new role within the business for a Quality & Compliance Coordinator.

With this being a newly created role within the business, we are looking for someone with the basic experience of working within a quality role, with the ability and commercial awareness to progress and develop the role into more.

Main Responsibilities of the role will include -

• Processing customer returns/complaints/credit notes and identifying supplier/product defects.
• Handling return stock to the supplier.
• Liaising...

Our Client is a well known and dynamic International Company with products sold into areas such as aerospace and automotive

They are now looking for a Production Planning Manager and the role will be as follows:-
-To provide an effective and efficient production plan to meet the needs of the Company and to support the profitability, inventory and cash management objectives.

-To create a production plan to best optimise plant and equipment whilst meeting the needs of the business

-To ensure the plan optimises the flow through the facility

-To ensure the plan supports the business needs whilst meeting all inventory...

Assystem are currently representing the UK's largest car manufacturer in their pursuit for skilled Development Engineers to work at their Centre of Excellence in East Midlands. We are looking for Automotive Engineers with experience gained in Seating / Interior or Chassis Engineering at a Design, Test or Project level.

The successful candidates will work within the Chassis or Seating/Interior teams of the Vehicle Engineering department and be responsible for the prioritising concern resolution and prevention for current, future and past vehicles.

You will be:

Technically qualified to degree or HND level, with 2 – 3 years...

This leading manufacturer based outside of Chesterfield in the Peak District are currently recruiting for an experienced Industrial Engineer to join their business.

The successful candidate must have experience in an electromechanical/instrument manufacturing environment and is able to read engineering drawings.
It is also advantageous that the candidate has proven experience in improving processes and products through implementing and sustaining Lean manufacturing tools and techniques, Six Sigma, including value stream mapping, 5S, TPM, SMED, Kaizen and factory planning.

Key duties and responsibilities:

- Supporting the...

Inspire Resourcing are recruiting for Engineers in various sectors and industries.

We have a role available for a Mechanical Design Engineer. The client has new products is bringing it into the market in the near future. They have enquiries from clients in the drinks industry to the sewage sector to farming so being able to turn your skills to these sectors are essential.

This role is a concept Design role so the ideal candidate will have:

A design background
AutoCAD Solid works
Word / Excel skills
An eye for detail
Knowledge of SCADA / Rockwell / Siemens / PLC's

The Role:

This is a role to work...

Are you an Apprentice Trained/Time Served trained General Machinist?
We are looking for someone who is an experienced miller and turner with a good all round knowledge of machining, milling, turning, boring and drilling.
The work is all Manual.
You would be producing electro mechanical parts and repairing them.
Immediate start for the right candidate.
37.5 hrs per week 8-4 Mon-Fri.
O/T available at time and a half and after 5 hrs double time. ...

An established company in Chesterfield is looking to expand their existing team and are looking for a CNC Miller to work permanent shifts.

You will need to be an EXPERIENCED CNC Miller and would be working in a newly built complex within the oil and gas sector. Working on small batch to one off components up to 2-3 meters in length so previous experience within this sector would be a distinct advantage. MUST have experience of working on Fanuc and heidenhain controls.
The company has a full order book for 2012 and beyond
This is a great opportunity for the right candidate.
Immediate start!

The pay rate is between £10.21...

We are currently seeking an Electrician qualified to 17th Edition with additional City and Guilds 2392 20 (used to be 2400 qualification).

Main duties will include the design and installation of lighting systems. Applicants must be compliant in the design of lighting systems and be safe and compliant at all times.
A driving licence is essential due to the location of work, and own vehicle is desired although you will get use of a company vehicle.

An inspection background and a Cherry Picker licence would be a distinct advantage but is not essential. Some jobs will involve working away for a few days in the week, which will...

Junior Chemical Process Technician

Chesterfield, Derbyshire

£16,000 - £21,000 + excellent benefits

Are you either a chemical engineering graduate or a Junior Process Technician from a chemical background, looking to join a well-established company offering comprehensive training and future progression?

On offer is a technically interesting role working for a market leading company with a loyal workforce.

This manufacturing company have several sites nationwide with plans to expand into Europe.

This role would suit either a Chemical Engineering graduate or a Process Technician from a chemical background...

We are currently looking for Coded Welders to work weekend shifts in the Chesterfield area, you will have experience of TIG and STICK, Flux Cord and Fill & Cap would also be a distinct advantage.

Whether you have to coding's or the company you previously worked for have your coding's, we want to speak to you.

Some experience of industrial pipe welding would be a distinct advantage.
Hours are Thursday to Monday 0700-1700, overtime maybe required. Pay is £9.60-£10.00 depending on experience, overtime paid at overtime rates. Applicants MUST live within 15 miles of Chesterfield, as this position is temporary, although there is...

Our Client is one of the UK’s leading steel fabrication organisations. Since the introduction of a new sales function they have seen a rapid increase in demand for their services. As a result our client is looking for an Estimator to work within their team.

The Successful candidate will have the following skills and experiences;

ESSENTIAL:

• Experience within the steel fabrications and construction industry
• Estimating for main clients within the construction industry,
• Experience of architectural metalwork packages with include various elements from structural steelwork and staircases to stainless and glass balustrades...

We are currently recruiting for experienced platers for our client in the Chesterfield area of Derbyshire.
The company itself produce and fabricate sub sea structures aswell as mining equipment, so an ideal candidate would have previous experience in a similar role.
Working pattern will be as follows
-3 Months workshop based work in chesterfield, while work permits and documentation arrives (work will be paid at standard work shop rates).
-1 Month working in Angola doing the same work as in the workshop (Enhanced rates of £30ph)
-3 Weeks back in the workshop in Chesterfield.

Please send CVs and any relevant certification...