Manufacturing Jobs in Matlock

You will Control & coordinate waste movement on and off sites so that all acceptable waste materials entering or
leaving the Landfill are recorded and accounted for, in line with licensing requirements.

Duties:
* Direct traffic coming onto site and operate weighbridge, recording all vehicles entering/leaving the site;
* Record weights & waste type by vehicle, completing appropriate documentation and collect driver
signatures, etc for accounting purpose; update IWS system accordingly;
* Maintain the weighbridge and general area of the weighbridge including the office in a clean, tidy and
hazard free condition...

I am looking for people with experience in conversion, extrusions, blends and reclaim to work in a plastic manufacturing environment. You will work in a warm environment. You could be lifting heavy loads of recycled plastics. A fork lift truck licence would an advantage on all areas. This job is temp to perm and you're salary will increase after you are taking on to £8.37. Due to the high volumes of applications we are currently receiving, unfortunately we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have...

CNC, turning, vertical boring, fanuc, metal, lathe,

Main Purpose of the Role
Working in a busy production work shop of a large multi national company that produces components for a variety of industries. You will be working under pressure to use CNC machines to produce parts to order.

The Person
You should be flexible and dynamic in your approach, and bring energy and drive to your work. Key requirements are;
• Over 3 years CNC experience
• Close tolerance experience
• Vertical Boring or Turning experience

Key Responsibilities
• Set up & operate CNC...

We are currently looking for Bendi Truck drivers in the Alfreton area, working for a large,My client is looking for someone who is available for ongoing work on a full time basis. You will have a current Bendi truck licence.You will have a flexible approach to work and be available to work rotation 6-2, 2-10 shifts, immediate start. ...

Our client is looking for Mig Welders to ASME 9 Flux core and will be trade tested on site to work at their busy workshop. As a Mig Welder, you would have previous experience working on heavy fabrication structures and low to medium carbon steel, you will be working on up to 12 inches in thickness of steel. As the Mig Welder you will be required to work to Asme 9, flux core and solid wirer.

If you feel you are the right person for this role as a "Mig Welder" and have the above mentioned skills please click the "apply now" button at the bottom of your advert to progress you application further.
Alternatively if this role is not quite...

This is an exciting opportunity for a Buyer to join a leading fast paced organisation at the companies Chesterfield site.

With real opportunities for career progression and to have the autonomy to implement new procedures and ways of working this is an excellent career opportunity.

The successful candidate must have previous experience in a purchasing or buyers capacity, and it would be advantageous if this was within the manufacturing industry.
You must have excellent interpersonal skills and have the ability to work in a fast paced environment, working to and meeting tight deadlines.

Key duties will include:
- Liaising...

Top independent drinks company looking to mix it with a talented technician. This is a dynamic and highly successful business driven by the entrepreneurial spirit of its Directors to deliver innovative ideas to the premium drinks market. It is a progressive, vibrant and exciting place to work!
They are now looking for a key player to join the production team in a liaison role to work between NPD, Marketing, Purchasing, Suppliers and Packers to ensure efforts are co-ordinated and quality standards maintained at all times. This is a vital and pivotal role in NPD projects to ensure smooth delivery from concept to launch. It is essentially being...

Our Client is a well known and dynamic International Company with products sold into areas such as aerospace and automotive

They are now looking for a Production Planning Manager and the role will be as follows:-
-To provide an effective and efficient production plan to meet the needs of the Company and to support the profitability, inventory and cash management objectives.

-To create a production plan to best optimise plant and equipment whilst meeting the needs of the business

-To ensure the plan optimises the flow through the facility

-To ensure the plan supports the business needs whilst meeting all inventory...

This is an exciting opportunity for a Purchasing Assistant to join a leading fast paced organisation at the companies Chesterfield site.

With real opportunities for career progression and to have the autonomy to implement new procedures and ways of working this is an excellent career opportunity.

The successful candidate must have previous experience in a purchasing or buyers capacity, and it would be advantageous if this was within the manufacturing industry.
You must have excellent interpersonal skills and have the ability to work in a fast paced environment, working to and meeting tight deadlines.

Key duties will include...

Production Manager
Chesterfield
Permanent
£35k - £45k

Our client in the Chesterfield area have an immediate requirement for a Production Manager.

Production scheduling, continuous process improvements, problem solving, managing a team of production operatives in the conventional PCB assembly area and test area of the business, Responsible for ensuring compliance with defined job standards and quality targets. Managing KPI's in own area, reporting team performance to senior managers. Ownership of business charters. Liaise with customers on production scheduling and agreed targets. Liaise with engineering dept, assisting...

Production Manager

To be based in Chesterfield, Derbyshire

Salary is £35k - £40k

Production scheduling, continuous process improvements, problem solving, managing a team of production operatives in the conventional PCB assembly area and test area of the business, Responsible for ensuring compliance with defined job standards and quality targets. Managing KPI's in own area, reporting team performance to senior managers. Ownership of business charters. Liaise with customers on production scheduling and agreed targets. Liaise with engineering dept, assisting with new product introduction, review and approve build instructions...

Leading Manufacturing firm with offices based in Chesterfield are currently seeking a high calibre Continuous Improvement Manager to be responsible for the planning, facilitation and completion of Continuous Improvement Projects to enhance operational effectiveness and support the strategic cost reduction objectives of the company.

The successful candidate will be able to demonstrate a proven track record in problem identification and data analysis resulting in the delivery of results through project implementation.
This will be in areas including productivity improvement, downtime reduction, wasted reduction and set up times reduction...

Quality Engineer

To be based in Chesterfield, Derbyshire

Salary is circa £30k

Monitoring and reviewing production, process and products, mainly PCB and some box assemblies. Inspection of final assemblies, for release to customers

Improve and contribute to quality system procedures, Reporting performance to quality team and senior management.

Mentor and work with Production staff. Quality performance and analysis of performance.

Knowledge of ISO 9000, AS 9100 and other quality standards. Experienced in quality in the manufacturing Industry - Ideally IPC 610 qualified- PCBA inspection experience -Fabrication...

We are currently looking for individuals to work on the shop floor operating machines to make packaging products.

The successful candidates will also work on the end of the line packing and decorating as required. Applicants must have excellent attention to detail, and a high level of basic numeracy and literacy as there will be initial skills testing which must be passed before a position is offered. You will also need to go through a full day of health and safety training before a start date is given.

You will be required to work days and nights on a rotation basis, averaging 48 hours per week. For successful candidates, this...

This is an excellent opportunity for an experienced Workshop Manager to join a leading and established business at the companies Chesterfield site.

The successful candidate must have previous experience in a supervisory or management role. A Mechanical Engineering qualification would be advantageous.
Good mechanical skills are essential and basic electrical skills would also be advantageous.
Microsoft Office programmes proficiency is also essential.

Key Duties and Responsibilities:
- Maintaining effective systems for plant and equipment; Ensuring all equipment is registered on relevant database, current locations of equipment...

We are currently looking for experienced hand assemblers in the Holmewood area.

Applicants must have previous experience of working within a fast paced assembly environment working to strict timings on a production line environment, which must be demonstrated through references. You will be reliable, have excellent attention to detail and be keen and willing to learn. The role involves the use of hand air tools, for which training can be given.

The position is long term for the right candidates with a strong possibility of going permanent. Applicants must be available for shift work if needed, mainly days and afters but there...

Junior Chemical Process Technician

Chesterfield, Derbyshire

£16,000 - £21,000 + excellent benefits

Are you either a chemical engineering graduate or a Junior Process Technician from a chemical background, looking to join a well-established company offering comprehensive training and future progression?

On offer is a technically interesting role working for a market leading company with a loyal workforce.

This manufacturing company have several sites nationwide with plans to expand into Europe.

This role would suit either a Chemical Engineering graduate or a Process Technician from a chemical background...

Adecco has a temp to perm opportunity for an experienced Metal Worker.
Candidates MUST be able to read drawings and be proficient in Tig welding, use of guillotine, punches, fly presses, folding machines and hand tools. Experience of Silver soldering would be advantageous.

Hours: 8.30-5.00 Mon-Fri with overtime available which is paid at time and a half.

Adecco is acting as an employment business.
...

Our Client is looking for a Quality Assurance Inspector.

We are currently seeking a self motivated individual for the position of Quality Assurance Raw Material Meat Inspector.

Job requirements:-
Ensure achievement of the required quality and regulatory standards through carrying out of sample raw material testing.

You will be required to monitor results, highlight areas for improvement and be able to recommend remedial actions.

You must be able to demonstrate a high level of quality consciousness and have an eye for detail.

Able to make decisions.

Good literacy and numeracy skills
Minimum of one...

The Company – CAD Design Engineer

Our client is a successful manufacturing company who, due to growth, are seeking an experienced Design Engineer to join their team.

The role is very important to the company and the successful applicant will be working solely on product development.

The Role – CAD Design Engineer

The responsibilities of the Design Engineer will include:

• The design of new products according to specifications and standards
• Modifications to the design of existing products
• Preparation of assembly models / drawings
• Preparation of detailed engineering drawings of parts and components...