Engineering Jobs in Hove

Assystem are currently representing the UK's largest car manufacturer in their pursuit for skilled Development Engineers to work at their Centre of Excellence in East Midlands. We are looking for Automotive Engineers with experience gained in Seating / Interior or Chassis Engineering at a Design, Test or Project level.

The successful candidates will work within the Chassis or Seating/Interior teams of the Vehicle Engineering department and be responsible for the prioritising concern resolution and prevention for current, future and past vehicles.

You will be:

Technically qualified to degree or HND level, with 2 – 3 years...

Commercial Gas / Commercial Heating Service Engineer is required to service commercial boilers, burners and associated plant. The position is based in Sussex. You must be gas qualified on commercial heating systems (COCN1 / CODNCO1)

My client is a SME with contracts ranging from social services, offices and schools. They are involved on building service, HVAC and M&E.

Requirements
Technical qualification on commercial heating / commercial gas (COCN1 / CODNCO1)
Fault-finding and practical skills
Able to work unsupervised and function as part of a team
Driving Licence essential

The Role
Carry out the planned...

A domestic gas service and breakdown contractor established for over 40 years and are leaders in providing full domestic gas heating and also service and breakdown currently has key requirements for 2 Domestic Gas Service and Engineers to work on the Domestic Gas heating Contract in Mid Sussex London area. CCN1, CEN1, HTR1, WAT1, CKR1, CPA1.

Job Responsibilities:

As a Domestic Gas Service Engineer to work on the Domestic Gas heating Contract in and around the Mid Sussex area you will be responsible for:

* Carrying out servicing on domestic boilers and appliances

* being able to use a PDA

* Domestic Gas Service...

Acoustic Consultant Brighton KP 680

An exciting opportunity is currently available with an independent acoustic consultancy specialising in a wide range of acoustics including residential developments, planning, transport schemes, licensing, industrial and construction noise with an office in Brighton. Due to a large increase in workload our client has a requirement for an Acoustic Consultant already practicing at a senior grade to support and manage a wide range of projects in both the environmental and building sector. Previous experience of running medium to large projects and managing acoustic consultants would be essential.

Acoustic Consultant: BrightonKP 673
£20-40K (depending on experience)
Our client urgently requires and experience Acoustic Engineer to hit the floor running and assist with a developing work load and a number of pre-existing large projects.
Applicants MUST has a minimum of 3 years experience working within the environmental acoustics field, a BSC or higher in a related discipline, and associate or full IoA membership.
Experience with section 61 applications, noise modelling with Cadnaa and/ or Noisemap and a full UK driving licence is also essential to the role.
Projects will typically involve construction, industrial and infrastructure...

Environmental Acoustic EngineerBrighton KP 674£25K+

We are now looking for Environmental Acoustic Engineers in the Brighton area. Ideal applicants will have a minimum of three years working experience within the industrial/construction acoustics industry and a BSc in Acoustics or Noise and Vibration Control.

It is essential that all applicants be experienced in noise modelling with soft ware such as Noisemap and Cadna-a. Familiarity with Section 61, and noise modelling is key to this role, with full or associate IoA membership (depending on level of experience), being highly advantageous.

Candidates must be self motivated...

Environmental Acoustic EngineerBrighton KP 674£25K+

We are now looking for Environmental Acoustic Engineers in the Brighton area. Ideal applicants will have a minimum of three years working experience within the industrial/construction acoustics industry and a BSc in Acoustics or Noise and Vibration Control.

It is essential that all applicants be experienced in noise modelling with soft ware such as Noisemap and Cadna-a. Familiarity with Section 61, and noise modelling is key to this role, with full or associate IoA membership (depending on level of experience), being highly advantageous.

Candidates must be self motivated...

Sales Engineer, Technical including Trainee(s) or Graduate(s), Technical Sales Engineer, WILL also consider Junior, Trainee Sales Engineers BUT SOME sales experience is absolutely ESSENTIAL ! Selling PC, computing, electronics hardware, industrial computers, OR data communications (infrastructure, gateway and conversion products) OR Measurement, Control and instrumentation products OR engineering services solutions sales. Excellent package and benefits depending on experience.

My client has gained unrivalled experience in the manufacture and distribution of products and systems for industrial applications, data communications, computer...

Estimator / Engineering Estimator/ Cost Engineer – Mechanical Engineering.
The Company provide a complete electromagnetic design, manufacture and test service. The aim of the company is to match their product to the customer’s requirements in terms of performance, price and delivery.

An Experienced Engineering Estimator is required to join a forward thinking company working within a ground breaking sector. You will be responsible for organising the estimating activities of the company based on available resources and deadlines. You will liaise with customers and suppliers, obtain quotations for materials and services, determine methods...

With a world wide presence, my client is a leader in controls systems.
Offering services in design, manufacture and engineering they are currently
experiencing a period of continued major success. This has led to a
requirement for a Senior Hardware/Test Engineer.

Your role will involve development of testing and calibration systems for
manufactured products. This will involve design of test systems; down to
component level.

You will require the following experience:

- Analogue and digital design
- Prior use of ATMEL/PIC microprocessors
- High accuracy calibration design
- Problem solving of manufacturing...

Our client is seeking a Mechanical Quality Engineer to maintain quality standards for their business.

The candidate we are seeking will be an experienced quality professional from a automotive manufacturers or tier one background and will be knowledgeable with regards to the operational parameters and methods that apply to this industry sector.

You will be responsible for quality issues and will be prepared to take an active part in working with the business to ensure the highest quality standards are met and maintained. You will be able to competently use measurement quality equipment and be able to use coordinate measurement machines...

Our client is an internationally renowned engineering consultancy and world leader in energy technologies. The Thermal & Renewables Division of their Power Unit are recruiting for a Senior Process Engineer with good industry experience to act as a principal carbon capture engineer within the team to deliver specific projects or sub-projects. You would also be required to act as a Senior Project Manager.

The successful candidate will work in interdisciplinary project teams on a range of assignments covering carbon capture and storage (CCS) on coal, gas-fired, coal gasification (IGCC plants) and capture-ready plants. You will have the opportunity...

Maintenance Technician Mechanical / Electrical - Power Generation

West Sussex

Salary circa £31,000

An excellent opportunity has become available for an experienced mechanical bias Multi Skilled Maintenance Technician to join a Power Plant / Heavy Industrial site in West Sussex. You will be suitably qualified with experience in the Maintenance of mechanical & ancillary systems of large either Power Generation, Process or Heavy Industrial Plant.

Working as part of the Maintenance Team responsible for ensuring the maximum availability & efficiency of mechanical & ancillary assets on site in accordance with strict...

We are currently recruiting 2 additional mechanical fitters for a prestigious client based in the Brighton area. Mechanical fitters will be working on a contract to permanent basis where working hands on within the company on a T-P basis will enable them to assess your skills and ability to learn deciding ultimately where within the company you will end up.

Our client is internationally known, with facilities in China, Australia and the USA, with subsidiary service and parts offices located in every country. Previous applicants have continued to work within their Head of Global operations and developments based in Brighton where...

Environmental Consultant - Brighton - circa £23,000

My client, a respected Environmental Consultancy with an excellent reputation is currently seeking an Environmental Consultant to be based in Brighton on a 6 month contract basis.

The successful candidate will ideally have a detailed technical understanding of environmental legislation as well as being an accomplished interpretive report writer. You should have 3-4 years' experience working within a similar environmental consultancy as well as an BSc / MSc in Environmental Science or similar.

Serving a range of clients in the environmental sector, the successful candidate...

With a world wide presence, my client is a leader in controls systems.
Offering services in design, manufacture and engineering they are currently
experiencing a period of continued major success. This has led to a
requirement for a Senior Hardware/Test Engineer.

Your role will involve development of testing and calibration systems for
manufactured products. This will involve design of test systems; down to
component level.

You will require the following experience:

- Analogue and digital design
- Prior use of ATMEL/PIC microprocessors
- High accuracy calibration design
- Problem solving of manufacturing...

Inventory Planning ManagerBrighton

The Inventory Planning Manager is responsible for the generation of a plan that will achieve the Turns target that supports the Cash objectives. An operational role working in the Sales and Operations Planning group (S&OP), he/she will develop the annual budget and set the regional targets, with input from all accountable inventory owners. Will co-ordinate the monthly review cycle and execute the daily operational activities that drive the execution systems. Will review policies with Sales and Operations input to improve the product availability, maintain market lead-times and maximise CSL (Customer...

Mechanical Technician / Mechanical Fitter
Job Purpose Summary:
The build and or test products to the specified level of output to the required time, quality, cost and standards.

Responsibilities: Mechanical Fitter/ Mechanical Technician
• Ensuring all equipment and tooling is functioning to achieve the required results for the operations undertaken..
• Ensuring that all work produced meets the specified level of quality.
• Build and assembly of products.
• Maintaining a high standard of housekeeping and safe working practices in the section having due regard to the Company’s Health and Safety policy.
• Ensure that...

Our client is an internationally renowned engineering consultancy and world leader in energy technologies. The Thermal & Renewables Division of their Power Unit are recruiting for a Principal Process Engineer with good industry experience to act as a principal carbon capture engineer within the team to deliver specific projects or sub-projects. You would also be required to act as a Senior Project Manager.

The successful candidate will work in interdisciplinary project teams on a range of assignments covering carbon capture and storage (CCS) on coal, gas-fired, coal gasification (IGCC plants) and capture-ready plants. You will have the...

Production Engineer – High Value, Low Volume complex Mechanical Assemblies.
Production Engineer experienced in supporting the manufacturing of high value, low volume complex manual assemblies through preparation of documentation, developing methods, jigs and help with some process planning, a hands on can do attitude is vital, any Lean experience or background would be very useful.
The Production Engineer will provide manufacturing engineering support and facility management expertise to ensure the efficient, cost effective production of products, which meet the quality requirements of the business. Extensive liaison with external suppliers...