Engineering Jobs in Harpenden

Assystem are currently representing the UK's largest car manufacturer in their pursuit for skilled Development Engineers to work at their Centre of Excellence in East Midlands. We are looking for Automotive Engineers with experience gained in Seating / Interior or Chassis Engineering at a Design, Test or Project level.

The successful candidates will work within the Chassis or Seating/Interior teams of the Vehicle Engineering department and be responsible for the prioritising concern resolution and prevention for current, future and past vehicles.

You will be:

Technically qualified to degree or HND level, with 2 – 3 years...

My Client is looking for a gas engineer for there maintenance division, to implement servicing and repairs in Herts, Beds and Bucks area.

The ideal candiate must have good experience in the industry, and have a sound knowledge to carry out breakdown repairs as well as servicing.
You will be working on domestic and commercial boilers, so the successful candidate will need to have commercial change-over qualifications or be prepared to achieve this.

Benefits
Good hourly rate, paid annual leave, van and fuel card, uniform, after qualifying period pension, after qualifying period Private Health Care in accordance with HVCA standards...

Contract Manager - Luton based - £50,000 + car allowance

My client is one of the largest and well respected FM and Building Service Providers in the UK. They currently have an exciting opportunity for a experienced Contract Manager to take responsibility for all hard service maintenance on a contract covering 6 large sites north of the M25.

The right candidate will be based out of Luton at least one day a week and will be expected to attend any of the sites as and when required. The role will be working closely with the operations team to supply the agreed level of service to the client and also look at further opportunities...

Automotive, Motor Trade Job: Service Advisor Required in Luton, Bedfordshire

Salary: £19,000 Basic, OTE £24,000 + Bonus
Term: Full Time, Permanent

Motor Trade Jobs / Automotive Vacancies:

Automotive Service Advisor required in Luton.

Our client, an Automotive Main Car Dealership in the Luton area is currently looking to recruit a Service Advisor to work in their busy Aftersales department.

As an experienced Service Advisor you will have experience in completing job cards, upselling of products and treating customers as required by the manufacturers set standards.

My client is looking for an experienced...

Light / Heavy Commercial Technicians – Luton

My client is currently recruiting for multiple Van Technicians around Luton.
You will need to have a previous experience of working on Light vehicles. The main duties and skills are outlined below.

• Carry out routine maintenance and repairs on Light commercial vehicles. HGV / LGV
• Experience working on Breakdowns and on a Call out rota
• Diagnose and rectify all types of faults
• Maintain a thorough and current knowledge of products and attend training courses
• Ability to work under pressure
• Ability to actively seek solutions to problems
• Good verbal communication...

A Production Manager with extensive sheet metal fabrication and assembly experience is required for our client based in Luton.

General production management responsibilities including H&S, liaising with design, internal sales and production control, motivating staff, and improving and developing working practices.

A hands on manager is required with a full and comprehensive understanding of computerised manufacturing control systems, basic MRP and a familiarity with CNC control brake presses and punching machines.

...

*** TECHNICIAN , VEHICLE TECHNICIAN , CAR TECHNICIAN , DEALER TECHNICIAN , SERVICE TECHNICIAN , MECHANIC , CAR MECHANIC , *** LUTON FRANCHISED CAR DEALERSHIP ***

Vehicle Technician is required for a busy Franchised Car Dealership in Luton. They are looking to employ an experienced Technician to carry out servicing and repairs. An MOT tester would be desirable but not essential. The company has a strong presence throught the region and has experienced fantastic growth in recent times. This opportunity offers a secure and rewarding career for the successful technician.

If you want to be part of a strong team of technicians then please...

Civil Engineers, Rail

Luton, Bedfordshire

£30,000 to £50,000 + Package

My client are a well respected medium sized design consultancy who are currently looking to recruit into their busy Luton office.

They are currently seeking Civil Engineers who have experience in rail work to design and manage rail infrastructure projects.

Civil, structural and permanent way experience is expected of the successful candidates. A sound engineering background in the coordination of civil/structural engineering projects and an ability to either be part of or lead teams in developing projects from feasibility through to construction...

HGV workshop Manager

Our client is currently in the market looking for a new Workshop manager to look after their site based in Luton. If candidates have previous dealership backgrounds this will be advantageous

Main responsibilities will be running and organising the workshop to make sure it is working to full capacity. Liaising with customers to make sure they are looked after and are kept updated on state of the vehicles. Good organisational skills a must. Previous experience running busy workshops a must.

In return our client is offering superb rates of pay and additional benefits.

...

Due to expansion, we require a Works Manager/Production Manager for our client that specialises in stainless steel fabrication and handling systems

Based in Luton - Interviews in May

Job

Responsibilities:-

• Day to day management of the production team.

• Working closely with design, internal sales and production control to set priorities through production, which can change by the hour.

• Day to day responsibility of works health and safety and working practices

• Day to day responsibility for discipline and standards

• Ensuring that all stocks of tooling and consumables are replenished...

My client have been established for 15 years and grown to it's current size and turnover of approximately £10m. The growth has been managed so as not over stretch the company and to maintain levels of service that attract repeat business.

All their projects are well managed with a contract engineer appointed at the start to ensure we work with clients at all stages of the project to achieve a common goal.

Having held the position of Electrical Estimator before you will be well versed in the role. Preparing tenders, assessing the cost of labour, preparing bills of quantities, dealing with enquiries from clients, and getting involved...

Position: Quality Team Leader / Senior Quality Engineer / ISO 13485 / Medical Device / Senior Quality Assurance Specialist
Salary: £35,000 - £40,000
Location: Luton

Quality Team Leader / Senior Quality Engineer / ISO 13485 / Medical Device / Senior Quality Assurance Specialist wanted for an immediate start to lead and co-ordinate the actions and continuous improvement activities of the team in meeting customer quality requirements which will include the maintenance of Quality Assurance systems.

The Quality Team Leader / Senior Quality Engineer / ISO 13485 / Medical Device / Senior Quality Assurance Specialist will be required...

Mechanical Design Engineer with AutoCAD LT or similar experience is required urgently by our client for a contract or permanent position within their extremely busy design team.

Working on various sized projects, for mechanical handling equipment/special purpose machinery predominantly for the Food, Beverage, Pharmaceutical and automation industries, familiarity of working with sheet metal fabrications and stainless steel is essential.

...

Our client’s Industrial Division Manufacturing Unit in Luton, has a vacancy for a Manufacturing/Production/Process Engineer.

6am -2pm and 2pm - 10pm Monday to Friday.

Start on £34,155 inc shift allowance + overtime at x1.6 Sats and x2 Sundays.

Responsibilities:

• Support and liaise with all manufacturing personnel to aid the successful resolution of issues in daily manufacturing activities.

• Maintain, develop and optimise key processes to reduce costs, improve quality, reduce machine resetting time, whilst ensuring all aspects of operations are both safe and efficient.

• Support and prepare capital...

Our Client have an outstanding opportunity for an experienced, entrepreneurial, and forward thinking Supply Chain Planner. Working with a tight knit team, you will have excellent experience of working in a Materials Management/Supply Chain environment. This role will be based in Luton and operating on a 40 hour week.

The key responsibilities include but are not limited to the following:

*Build, manage and own relationships with a diverse mix of worldwide suppliers to deliver optimal performance and adherence to commitments
*To obtain, maintain and follow up on delivery commitments on a daily basis to improve customer satisfaction...

Lean Manufacturing Project Engineer

To £34k

Luton

Tasks:

Responsible for deployment of the companies Resetting concept to reduce set times, improve processes and bring about cost saving, increase sales and customer benefits

Set priorities and guide preset and tool store

Facilitate, coach and support teams

Promote the use of set time reduction methodology

Ensure set time reduction activities are aligned with the balance score card

Drive and facilitate the organisation in implementing the Resetting concept

Responsible for roll out plans for set time reduction, timeline...

Light / Heavy Technicians

My client is currently looking to fill a number of positions around the Luton area. They are looking for a Light Technician to work on their Vans and a Heavy technician to work on their HGV’s / Trucks etc.

Candidates must have experience with working either with Light commercials or Heavy vehicles and relevant qualifications as well ( NVQ or C&G’s )

In return my client offer fantastic rates of pay, a variety of shifts and career development as well.
...

Multi skilled Maintenance Engineer.

Our client is looking for a Multi skilled electrical / Mechanical Engineer to join the their mobile maintenance engineering team. We are looking for an engineer based in the Luton / Bedford area, with good mechanical/ Electrical fault finding and repair experience. The role is maintaining a range of large industrial processing equipment. We are looking for an electrical qualified person, ideally experienced with three phase electrical supplies.
If you have worked as a factory maintenance engineer, and have been repsonsible for the production / process line then this could be an opportunity to work...

Operations Manager- Luton - from £40kpa

Search Consultancy are proud be working on behalf of one of the largest UK gate and door Manufacturers
We are currently seeking an experienced Operations Manager with a hands on engineering/metal fabrication background to become part of the senior management team.
To oversee operational and strategic management production. Continuously improve and develop operations process.

You will have a hands on engineering/metal fabrication background, with experience of SME business essential.
Essential hands on skills include processes/systems, product costing, purchasing, fabrication,...

Our client is a well established Engineering Manufacturer based in Luton.

Due to expansion they have created a new role for a Resetting Champion, where Project Management and Lean Manufacturing skills are required.

Tasks:

* Responsible for deployment of the companies Resetting concept to reduce set times, improve processes and bring about cost saving, increase sales and customer benefits

* Set priorities and guide preset and tool store

* Facilitate, coach and support teams

* Promote the use of set time reduction methodology

* Ensure set time reduction activities are aligned with the balance...