Aerospace Jobs in Suffolk

YOU COULD EARN UP TO £600 P/W AS A DRIVING INSTRUCTOR

To train as a Driving Instructor no previous experience is required.

As a Driving Instructor you can choose when, where and how you work.

By working as a Driving Instructor you will meet new people and teach them a skill for life.

Become a Driving Instructor with the UK’s largest instructor training network, RED Driving School.

WHY BECOME A DRIVING INSTRUCTOR?

The driving instruction industry is at a most exciting time. With the number of lessons taken by each learner to pass the driving test increasing year on year, there is always a demand for professionally...

Automotive, Motor Trade Job: Car Sales Executive Required in Bury St. Edmunds, Suffolk.

Salary: OTE £35,000 Per Annum
Term: Full Time, Permanent

Motor Trade Jobs / Automotive Vacancies:

Automotive Car Sales Executive required in Bury St. Edmunds.

A Car Sales Executive is needed for a main dealer in Bury St. Edmunds.

As an automotive Sales Controller you will report directly to the General Sales Manager and oversee the sales operation.

You will be responsible for maximising profitability per unit sales, exploring sales opportunities and managing all sales enquiries.

The main challenges within...

Automotive, Motor Trade Job: Vehicle Technician / MOT Tester Required in Lowestoft, Suffolk.

Salary: £18k -£20k + bonus
Term: Full Time, Permanent

Motor Trade Jobs / Automotive Vacancies:

Automotive Technician / MOT Tester required in Lowestoft.

We are currently seeking to recruit a fully qualified Technician and MOT Tester to join our client's motor trade facility.

As an experienced individual, you will be skilled in all aspects of vehicle repairs and servicing including diagnostics and electronics.

You must be able to produce high quality work in a busy motor trade environment and be motivated...

Automotive, Motor Trade Job: Vehicle Technician Required in Ipswich, Suffolk

Salary: £10 - £12 Per Hour (approx. £21,320 - £24,960 Per Annum)
Full Time, Permanent

Motor Trade Jobs / Automotive Vacancies:

Automotive Vehicle Technician required in Ipswich.

We are currently seeking to recruit a fully qualified Vehicle Technician to join our client's garage in the Ipswich area.

As an experienced individual, you will be skilled in all aspects of vehicle repairs and servicing, and have a good understanding of diagnostics and electronics.

You must be able to produce high quality work in a busy motor trade...

Your primary focus will be to guide and work with the team and prime product development group to define, develop, test, and deliver integrated electrical and electronic machine control systems for earthmoving machines products designed and developed in Europe. This may include coordination and integration of various systems such as drive train, braking, steering, implement, operator interfaces, monitoring systems, and power systems.

The Role:

Design, manage coordinated development, test and deliver integrated Machine Electrical and Electronics Systems.

Solicit capture and document Electrical and Electronics System Requirements...

You will be responsible for 17 operatives, comprising 11 direct reports and 1 supervised team, consisting of Technical Specialists, both senior and junior Engineers, an Engineering Team Leader, senior Technicians and a Placement Student for Advanced Materials Technology (AMT) which is the organisation responsible for providing materials, metallurgical and process engineering support to the Company's UK facilities.

The main focus of AMT, is supporting the various Business Units in the UK including engineering, CAE, quality, aftermarket, manufacturing, sales and purchasing.

The nature of the technical support provided by the team...

You will carry out research & development work on either current or new engines. The ability to work to engineer's instructions, carry out a range of test work, including fitting prototype parts to an engine and/or record and produce quality data is fundamental.

You will be based within the Global Engine Development department which is dedicated to providing leadership in engine test and development solutions.

Requirements:

Mechanical/electrical experience on diesel engines, such as stripping & rebuilding along with an understanding of common rail fuel systems.

Good PC skills.

Engine test rig experience and...

You will be responsible for contributing leadership and expertise as part of a continuous quality improvement process for the supply base in the execution of Advanced Product Quality Planning (APQP) and the implementation of process control.

You will also be responsible for suppliers' processes from cradle to grave in the product life, validating process capability and managing project plans and activities to ensure compliance with Company expectations, while adhering to the highest ethical and professional standards within this diverse global organization.

The Role:

Working with suppliers to ensure that robust process...

You will join the European Engine Systems team, which is responsible for engine control system development for various facilities in Europe, taking an active role in programmes supporting the marine engine centre for our client, who is the world's leading manufacturer of off-highway machinery and diesel and natural gas engines.

Through this role, you will have an excellent opportunity to take part in, and have significant responsibility for, nearly every aspect of the end-to-end development process for a modern engine electronic control system. This will give true product ownership and the opportunity to see your products through to volume...

Reporting to the Supplier Quality Manager, you will be a member of the Global Purchasing team and be tasked with leading a team of 6, targeting proactive quality improvement using such tools as APQP, PPAP, 8D, & Poke Yoke.

The organisation is chartered with building strategic supply relationships that deliver superior Quality, Cost, Logistics, Development, & Management (QCLDM). Specifically, the Supplier Quality organisation is chartered with delivering breakthrough improvements in supplier quality.

The Role:

Drive collaboration among design engineers, business unit Concurrent Product and Process Development (CPPD) Team...

Reporting to the Materials Engineering Manager, you will be involved with the analysis and investigation of almost any component or system originating from an engine or product (engine and vehicle).

The Role:

Perform detailed investigations of field failure returns to identify the root causes of failure and corrective actions.

Testing and investigative support (products and processes) to manufacturing lines.

Routine testing of components from new suppliers.

Supplier visits to evaluate manufacturing capabilities.

Technical support and leadership on material selection.

Writing investigative reports...

Our Clients will require experienced qualified contractors to work as Control Panel Techs Fitters on the build of control panels, plant skids, analysing units etc. Setting out panels. Bending and fitting instrument pipe work from drawing 4 - 12mm. Also fitting valves, flow meters etc. Also Panel Electrical an Instrument Techs working on electrical an instrument systems Working mainly in the work shop but may also be required to work on sites depending on work load.Off Shore Survival and Medical Certs would also be an advantage because there may also be off shore work.Quals: CG or NVQ instrumentation or pipe fitting, ideally with swagelock certs...

You will be responsible for the design, development, and maintenance of new and existing products and components as part of the Development Team whose responsibility is to own component and system development activities across the whole mechanical systems team.

The CPPD (Collaborative Product and Process Development) Mechanical Systems Team is dedicated to the delivery of quality, on-time and cost-effective designs. The team is structured into three main systems groups (Air, Fluids and Core), all three of which are supported by design and development teams.

The Role:

You will be responsible for both NPI (New Programme Introduction...

You will be responsible for the design, development, and maintenance of new and existing products and components.

Our Client is a world leader in the development and manufacture of diesel engines and has global responsibility for developing technology to support future product needs.

The Role:

Support the Tier 4 interim aftertreatment development program with the following main objectives:

Test planning and setup (working with V&V, GED and outside test shops).

Data analysis Customer product issues (MyCPI) tracking & management.

Prepare product issues summaries for the management team.

Assist...

You will manage all aspects of ensuring compliance with global regulatory requirements regarding Conformity of Production Auditing (mainly US & EU), and US Defect Reporting requirements for our UK based Emissions Regulations & Conformance (ERC) Team.

They are part of a wider organisation and are responsible for all applicable engine exhaust emissions certification and on-going conformance monitoring for products worldwide. This includes both higher (US, Europe & Japan) and lesser (India, China, S.Korea, etc.) regulated countries.

The Role:

Ensuring adherence to mandatory global Conformity of Production (CoP) requirements...

Job Details

Car Sales Executive

Job Reference # 2787
Location East London/Essex
Salary £11000 - £65000
Job Description

Are you experienced successful sales professional looking for a new challenge? Our client, the 2nd largest privately owned dealer group in the UK with 71 dealerships within their group have an opportunity for an experienced Car Sales Executive to enhance their dealership in East London/Essex. The successful candiate should be able to demonstrate their ability to provide exceptional customer service and build lasting relationships with customers. You will have a proven track record in achieving...

Automotive Business Manager Required in Ipswich

Full Time

OTE £40k

Company car

Our client a Main Franchised Dealer in the Ipswich area is currently looking for an experienced Business Manager to join their well established and successful site.

As a Business Manager you will be working with an experienced Sales Team and will be responsible for maximising all finance and add on opportunities, whilst ensuring that all company, manufacturer and finance house disciplines, procedures and targets are met.

Another aspect of your role as a Business Manager will be to stack deals and prepare quotes for your...

JOB DESCRIPTION

Job Title:AUTOMATION DESIGN ENGINEER

Location:Mildenhall UK

Hours:40 hours over 5 days - standard with some requirement for flexibility

Salary/grade:£25k + benefits, negotiable for the right experience

OVERALL PURPOSE OF ROLE:

Typically responsible for: concepts, design layouts, detail drawings and design calculations for new automation and tooling projects.

MAIN RESPONSIBILITIES

Carries out assignments usually on one project within a broader project relating to the design of new concepts, components and equipment or automation systems
Tasks assigned might typically include...

Polisher Grinder - Duties - will include grinding and polishing with grinders and buffers on sheet metal 1 - 2.5mm thick plus plate 6 - 25 mm thick, pipe 2 - 8 inch, vessels - tanks. to high mirror finish. Also other work when required such as assisting with fabrication, drilling, cutting materials on saws or plasma cutter etc. Qualification requirements Able to use grinders, profilers, drills etc. Ideally City Guilds or equivalent in Fabrication Pay will depend on experience an skills 9 - 11 per hr plus basic plus over time rates ...

We are recruiting forour clients in sveral areas in the E Anglia region for

CNC Programmers Millers and Turners

CNC Setter Ops Millers and Turners

CNC Ops

Manual Machinists

Shifts are varied but negotiable as with py

shifts 0800 - 1630, 0600 - 1400, 1400 - 2200 Mon -Fri plus overtime

Will need to have a good engineering back ground be able to read drawings

Ideally able to Program or Set with
HAAS and Mazatrol or Fanuc and Mazak
Applicants with other program exp will aslo be considered.
CNC Ops must have general work shop experience

Pay will depend on quals, expereince, skills...