Aerospace Jobs in Kenilworth

YOU COULD EARN UP TO £600 P/W AS A DRIVING INSTRUCTOR

To train as a Driving Instructor no previous experience is required.

As a Driving Instructor you can choose when, where and how you work.

By working as a Driving Instructor you will meet new people and teach them a skill for life.

Become a Driving Instructor with the UK’s largest instructor training network, RED Driving School.

WHY BECOME A DRIVING INSTRUCTOR?

The driving instruction industry is at a most exciting time. With the number of lessons taken by each learner to pass the driving test increasing year on year, there is always a demand for professionally...

SENIOR ROTOR DYNAMICS DESIGN ENGINEER

Internal Ref: 1008

Our client, based near South Coventry are looking to recruit a talented and experienced Rotor dynamics Design Engineer to support the development of advanced prototype components for Electric Turbo chargers.

You will be familiar with rotor dynamic theory, vibration analysis, and design and test of rotating machinery.
You will be required to work with suppliers to optimise your designs for manufacturability, weight, and performance.

Roles and Responsibilities -

You must be familiar with Rotor dynamic Simulation Software.

You will have a...

Blink! Driving School need new driving instructors nationwide. We’re looking for individuals who are seeking a career change and want a secure and rewarding job. We want people with at least 4 years driving experience, with no more than 6 current driving penalty points and who are prepared to train to become a government approved driving instructor.

- On target earnings £27,500 per annum based on 35 hours per hour
- Increased earnings possible
- Flexible hours, work when you want to
- Long term job security, there are always people learning to drive
- No experience necessary, training provided (course fees apply)
- Work...

You will significantly contribute to the design and specification of 'clean sheet' transmissions, sub-systems and components for our client, who is one of the top 15 vehicle manufactures in the world and is dedicated to powertrain design and development for next generation vehicles.

They have ambitious expansion plans and on-going major engine and transmission projects which offer exciting opportunities for the future.

Requirements:

Essential:

Minimum 5 years varied experience within a powertrain design environment, preferably transmissions.

Knowledge of manual transmission design criteria and specifications...

A great opportunity exists for an experienced Vehicle Body and Trim Engineer or Vehicle Body and Trim Project Manager to join this new Electric Vehicle manufacturer. Based in Coventry, it is commutable from Birmingham, Leicester, Warwick, Milton Keynes, Northampton.
Working within state-of-the-art manufacturing facilities, this role will appeal to an experienced Engineer / Manager with strong technical knowledge of Body and Trim Engineering and possessing excellent Project Management and communication skills. The job holder will take the role of liaison between the Design team based at the nearby Technical Centre and Manufacturing colleagues...

REQUIREMENTS:
Battery technology RandD is a fundamental activity at the Centre and this has created an opportunity for a talented Materials Technologist. This role will be the focal point for the development of materials and joining technologies enabling the automated manufacture of batteries and control systems. Working with colleagues in Product Development the job will develop materials and methodologies adopting a 6 sigma approach including the derivation of Development Verification Plans DVP to ensure fitness for purpose. UK based with the occasional need to travel overseas.

DESCRIPTION:
Based on a very attractive University...

Global Company who supply products, systems and services mainly for automobile and aerospace manufacturing and plan and build assembly facilities are looking for an experienced Design Engineer to produce and control all Project Design information according to primary engineering data. You will have experience in producing process equipment layout drawings with a mechanical engineering background. Paint shop layout experience especially desirable although any automotive, aerospace or construction industry considered.

Must have an HNC/HND or above in an engineering discipline with 3D Design package and AutoCAD 2D experience as an essential...

Our client has created a new vacancy created to support the new technology development programmes in driver information systems. The role works in Advanced Engineering so they are looking for someone who will be developing ideas for Driver Information Systems for use in 2020 and beyond, (future technologies). Our client have previously not had really any features or technology in this area, they are aiming to leap-frog from nothing to highly advanced systems such as Head-Up displays.

A possible applicant needs to be a genuine technical expert and have solid knowledge across the domain you are working in. Also for this role, Our client...

Our client has created a new vacancy created to support the new technology development programmes in driver information systems. The role works in Advanced Engineering so they are looking for someone who will be developing ideas for Driver Information Systems for use in 2020 and beyond, (future technologies). Our client have previously not had really any features or technology in this area, they are aiming to leap-frog from nothing to highly advanced systems such as Head-Up displays.

A possible applicant needs to be a genuine technical expert and have solid knowledge across the domain you are working in. Also for this role, Our client...

REQUIREMENTS:
The Motor Development Engineer will need to be able to show knowledge and experience within the development and specifying of industrial motors. Plus good logical reasoning project management, and a strong understanding of vehicle networking particularly CAN.
Knowledge of ECU`s and Hybrid or EV vehicles.
Development of electric motors and versatile in the application of engineering solutions.

DESCRIPTION: Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars,...

REQUIREMENTS:
You will be writing specifications for new power electronic components, sending them out to suppliers, managing problem solving, ensuring that the products are fit for purpose.

The role is more coordination, rather than design, very supplier focused and with a good technical background and understanding of in depth power electronics, this would suit someone who has previously been in a design role and is looking for a new challenge.

There will be a requirement to travel to India, but no more than 10% of the time.

DESCRIPTION: Our client is one of the world`s leading commercial vehicle manufacturers. Established...

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.
They are currently seeking a Senior Motor Development Engineer .
The Motor Development Engineer will need to be able to show knowledge and experience within the development and specifying of industrial motors. Plus good logical reasoning project management, and a strong understanding of vehicle networking particularly CAN.
Knowledge of ECU`s and Hybrid or EV vehicles.
Development of electric motors...

REQUIREMENTS:
You will be writing specifications for new power electronic components, sending them out to suppliers, managing problem solving, ensuring that the products are fit for purpose.

The role is more coordination, rather than design, very supplier focused and with a good technical background and understanding of in depth power electronics, this would suit someone who has previously been in a design role and is looking for a new challenge.

There will be a requirement to travel to India, but no more than 10% of the time.

DESCRIPTION: Our client is one of the world`s leading commercial vehicle manufacturers. Established...

Supply Chain Operations Manager - European Road Freight required for specialist premium freight business based in Kent with a regional office in the West Midlands. With a background in transport and logistics, you have extensive road freight experience ideally in Northern and Eastern Europe.

Supplier Manager - Premium Freight Business - CJ2924
£40k package (Circa £40k + Benefits) - Within commutable distance of Dover or Coventry

The Role To investigate, identify, and manage suppliers providing cost effective and highly efficient transportation solutions for external and internal customers. Additionally you will create and deliver...

Despatch Cell Leader Vacancy
Location: Coventry

Are you an ambitious, energetic and adaptable Despatch Cell Leader who would be committed towards driving our Clients’ company objectives further forward?

An exciting opportunity has arisen for a Despatch Cell Leader with our client who is an established automotive manufacturing company. Through diversity and change our client has become a progressive and successful First Tier manufacturing company producing Body-in-White components and assemblies. As a result of increased demand, significant investment (£12m), and planned new model introductions, they now have a vacancy for a Despatch...

Materials Analyst
Our Client:
Are you an ambitious, energetic and adaptable Materials Analyst who would be committed towards driving our Clients’ company objectives forward?

An exciting opportunity has arisen for a Materials Analyst with our client who is an established Automotive manufacturing company. Through diversity and change our client has become a progressive and successful First Tier manufacturing company producing Body-in-White components and assemblies. As a result of increased demand, significant investment (£12m), and planned new model introductions, they now have a vacancy for a Materials Analyst.

The Role:

As part of a global group the processes of this company are state of the art plastic blow moulding and system assembly, producing products which include fuel tanks and fuel pipes for Just-In-Time supply to Honda, Jaguar, Land Rover, BMW and Rolls Royce.
1.To develop and implement all facets of APQP activities including FMEA`s, control plans and PSW s well as establishing requirements for ongoing capability monitoring and SPC.

2.To be able to carry internal and customer RandR studies for process and gauge trials, using the company design and process scorecard.

3.To conduct both internal and supplier audits to ensure adherence...

A Measurement Analyst is required to join a busy 1st tier automotive supplier of premium interior trim parts. This role would suit a measurement specialist seeking a contract or temp to permanent opportunity who enjoys being valued as part of a team. With project expansion across various automotive OEMs this opportunity will be ongoing and as suggested is a priority of added vale to the business at this time. The business offers a good working environment and a supportive team ethos.

Measurement Analyst
Rate per hour: £25
Location: Coventry
Measurement Analyst

REPORTING TO QUALITY MANAGER

RESPONSIBILITIES

Our client are a family run business,established 30 years ago, providing a range of garage services to a loyal and diverse client base.

They are currently seeking an MOT Tester and an experienced Mechanic, suitably qualified and experienced, to join their friendly team.

You will receive a competitive basic salary with plenty of overtime available.

You will need to have a friendly personality and good communication skills.

Team Support operate as an Eployment Agency and an Employment Business.
...

Job Responsibilities:
To manage the execution of a number of concurrent projects with a range of customers whilst ensuring that the Business Unit: 

• Exceeds the Customer's requirements 
• Achieves World Class delivery, quality and reliability performance 
• Delivers profitable growth 
• Maintains continuous improvement and lead time reduction in all operational areas

Responsible for: 

• Ensuring that the appropriate resources and skills are available to meet demands. 
• Providing reports as required to Customers and to the Management Team.