Engineering Jobs in Warwickshire

Electrical Maintenance Engineer - Siemens S7 - £35,000

We are recruiting for a Maintenance Engineer with PLC Programming Skills particularly Siemens S7. The candidate will be working with a word leading supplier to the Automotive Sector.

The successful candidate will be covering breakdowns on a range of automated equipment and robotics.
Working to develop PLC programmes from scratch.

Extensive Siemens S7 programming skills are essential.

The role is based over a double days shift.

The salary for the role is £35,000
...

We are looking for a fully skilled VMC programmer/setter/operator with Heidenhain controls to work in our precision machine shop on nights. The machine you will be required to work is a Correa or Asquith machining large products of up to 20 ton, must be able to use an overhead crane to put products on and off machine. Working from drawings and utilising all relevant measuring equipment. ...

We are looking for a fully skilled centre lathe turner to work within our precision sub contract machine shop. You will be required to machine a variety of products for a variety of industries. Working from drawings and utilising all relevant measuring equipment. ...

Key Responsibilities

To plan & organise the day to day running of the Technical Department and be directly responsible for the Interpretation of customer enquiries with the view to bringing them to completion. The ability to read and interoperate engineering drawings would be essential.

Key Tasks

To oversee & be directly responsible for:

- Management and supervision of staff within the department.
- Training & development of staff within the department.
- Recruitment (In conjunction with the Sales Manager.
- Technical & commercial support to other members of staff.
- Maintaining good customer relations...

We are looking for a fully skilled Edward Pearson setter/operator to work within our precision manufacturing machine shop. You will be required to produce precision roofing products out of aluminium up to 5mm gauge, working from drawings and utilising all relevant measuring equipment a counter balance fork lift truck license would be advantageous. ...

Portuguese Speaking Sales Executive – Fastener Industry
Sales Executive, Business Development, Sales coordination, Customer service, Sales, Fluent in German

Main Duties: To manage and develop a specific sales area with known potential.
The Role:
• To be responsible for its own sales area (Brazilian Oil and Gas market)
• To organize the sales strategy to achieve targets (incentive scheme to be established)
• To find new customers and identify business opportunities to increase sales
• To manage clients accounts & develop business relationships with key accounts
• To improve the market knowledge and awareness
• To...

Experienced and skilled Plater/Fabricator to manufacture Architectural Metalwork and Structural Steelwork.
Staircases, Balustrades, Canopies etc.
Apprenticeship trained an advantage. Experience essential.
Working from engineering drawings and with the minimum supervision, progress the job through to completion, either as a member of a team or individually.
This will involves setting out, development, cutting, marking out, drilling, punching, bending, assembly and welding.
Must be experienced and able to work to high standard and tight tolerances on fabrications from small components to large single units.
Must be able...

We are looking for a fully skilled Charmilles spark eroder to work within our precision machining company. You will be required to machine precious products for the Aerospace industry from drawings provided and utilising all relevant measuring equipment, knowledge of CMM would be advantageous. ...

We are looking for a fully experienced cnc lathe sliding head setter/operator with fanuc controls to work within our precision machining company. You will be required to our Star cnc lathe also doing off sets and tip changes, working from drawings provided and utilising all relevant measuring equipment.
...

We are looking for a fully experienced cnc vertical borer working on a Massa with fanuc controls to work within our precision sub contract machine shop. You will be required to produce precision one off large products to drawing provided and utilising all relevant measuring equipment. A overhead crane license would be advantageous. This will be working 12shifts 6am to 6am Monday to Thursady.
...

We are looking for a fully experienced cnc vertical machining centre programmer/setter/operator with fanuc controls to work within our castings machine shop. You will be required to produce a variety of precision castings for the automotive industry from drawings provided, utilising all relevant measuring equipment.

...

Job Title - Toolmaker - Press Tools - Precision grinding
Location - Redditch, Worcestershire
Salary - £19k + depending on experience
Skills - Time Served, Lathes, Milling Machines, Precision grinding, Jones & Shipman, Diaform. The Role - Toolmaker - Press Tools - Precision grinding

Based in our in-house toolroom, we are seeking a candidate who is an experienced, City and Guilds served Time served Toolmaker to work mainly on press tools for our medical products.

Key duties would include:

Precision grinding mainly on a Jones & Shipman 540 with the ability to use Diaform and Optidress.
The re-grinding...

Job Title - Machine Setter - Needle manufacturing unit.
Location - Redditch, Worcestershire
Salary - £19k + depending on experience
Skills - Machine setting, Combination Presses,Grinding Machines, Needle manufacturing The Role Job Title - Machine Setter - Needle manufacturing unit.

Our client is looking for a skilled Machine Setter for the special purpose needle manufacturing unit. The range of machines required to be set and controlled include Combination Presses; High Speed Combination Presses and Grinding Machines. Note that these are general purpose and not CNC controlled machines.
Our needles are manufactured...

Vehicle Technician - Diagnostic Technician - Mechanic based close to Wolverhampton - West Midlands

Hours Of Work - 39 Per Week (Mon to Thu 8:30 - 17:30, Fri 8:30 - 16:30) There is also a Saturday morning working rota set in place to 08:30 to 12:30, you will NOT work every Saturday

Salary - £8 to £11 per hour - £16,500 to £23,000 per annum dependant upon experience, plus bonus.

You will join a team of 4 Technicians with a Workshop Controller/Master Technician who is 50% productive.

Technician Level - We are ideally looking for a high quality NVQ 3 level Tech with preferable strong diagnostic skills. We would also be...

*** TECHNICIAN , VEHICLE TECHNICIAN , CAR TECHNICIAN , DEALER TECHNICIAN , SERVICE TECHNICIAN , MECHANIC , CAR MECHANIC , *** LUTON FRANCHISED CAR DEALERSHIP ***

Vehicle Technician is required for a busy Franchised Car Dealership in Luton. They are looking to employ an experienced Technician to carry out servicing and repairs. An MOT tester would be desirable but not essential. The company has a strong presence throught the region and has experienced fantastic growth in recent times. This opportunity offers a secure and rewarding career for the successful technician.

If you want to be part of a strong team of technicians then...

Solidworks Design Engineer
(Mechanisms, Assemblies and Component Design)
£23-£25p/h, 3 Month Minimum Contract, Start 11th June

Through being awarded several major contracts with a number of high profile blue chip businesses both in the UK and overseas, this renowned supplier of special purpose machinery is experiencing a rapid increase in workload and urgently needs to recruit an experienced solidworks design engineer for a long term contract. With the company supplying machines into industries that are investing heavily in equipment, this is an exciting opportunity for an experienced design engineer and with the...

My client is an exciting and dynamic automotive organisation who are considered in the industry to be at the top of their field. Due to growth of the business an opportunity has arisen for a Design Engineer to join the team and develop a range of new truck-mounted products and assist in the development of existing products

Primarily the role will be to create and interpret specifications into cost effective functional
designs and to provide company wide support for design implementation. This will include working with cross functional teams or autonomously, creating and maintaining engineering drawings and material lists when design...

My Client is a facilities Management company that is currently recruiting for an Drainage Engineer to join their busy team, they are looking for a drainage engineer to provide services to corporate clients managing domestic and small commercial drainage failures. The company provides a quick and competitively priced response to their clients' needs whether it is a simple blockage, a drain collapse or a burst water pipe.

The Role:

As the Drainage Engineer you will be in a mobile role. You will be responsible for digging, excavation and repair and maintenance of domestic and small commercial drainage failures. You will be responsible...

CNC Miller & Turner - Programmer/Setter/Operator - West Midlands

Our Client is looking for an experience CNC Miller and CNC Turner- Programmer/Setter/Operator for a role in the West Midlands areas. Also interested in Setter / Operators in the area for positions.

This is a perm role, looking for a start immediately. Salary dependant on experience.

Candidates will be:
- Machining low quantities of precision items in stainless steel, brass and aluminium
- Able to set, programme and operate CNC milling machines OR CNC Turning machines
- Full knowledge of all workshop equipment
- Liaising with machine shop staff...

My client is a young and dynamic organisation involved in the research and development of high tech electrical turbocharging engine technology. The working atmosphere is both cutting edge and fun, and business is going through a great period of growth.

Due to expansion an exciting opportunity has arisen for a talented and experienced Senior Mechanical Design Engineer to develop its technology platforms for test cell and vehicle demonstration programmes. Suitable candidates will be familiar with materials properties, low-volume manufacturing processes in steels and aluminium, and rotating machine design (including bearings, and seals)...