Pipefitter Jobs

Time served Pipefitter required near Staines. Must be experienced in steel pipe up to 14" bore and must have experience in refinery work. Current CSCS and safety accreditation is essential. No welding is involved. This is initially a 2 month contract but could last much longer for the right candidatePluswork Ltd is committed to applying the principles of Equal Opportunities in its Recruitment Procedures and Services and is a Diversity Pledged Recruiter as developed by the REC and Job Centre Plus. ...

Our client are an established Building Services provider operating in all regions of the UK. They are currently looking to recruit an Industrial Pipefitter to work at AWE Aldermaston in Berkshire.

Your duties will consist of installing & maintaining mechanical building services plant & equipment for a range of different buildings on the AWE campus. You will need good general all round installation, refurbishment & building services knowledge as you will be required to repair, service & maintain mechanical & HVAC systems.

You will need to have a positive attitude towards your work responsibilities & adopt flexible working methods...

A leading pipework company that specialises in Commercial installations, renovations, and refurbishments currently has a requirement for commercial pipe fitters with IPAF to install commercial pipe work, screw barrel, fixtures and fittings for a commercial project based in Oxford.

MUST HAVE IPAF

Job Responsibilities:

As a Commercial Pipe fitter

mechanical installations screw barrel pipe work

Replacement of old pipe work, radiators, hot water systems

Bracket work

Near Oxford

Contract - £13.50 per hour ltd or CIS

Preferred Skills:

Mechanical Fitting

...

We are currently recrutiing for pipefitters for our prestigous client based in West Sussex. As an Industrial Pipefitter you will be required to work on large bore pipework at Gatwick Airport. The work will involve assembling and installation of pipe sytems Pipe supports and Pneumatic equipment for sprinkers, steam and hot water systems. Materials you will be working with include carbon and stainless pipe ranging from 1"-12" pipe. There may also be some copper work involved.

Shift patterns are 8am - 4.30pm with a 30 minute unpaid lunch.

You MUST have experience in working at Gatwick Airport previously, It will be a distinct advantage...

Pipefitters req'd must have CSCS, duties include screwed work, ABS and some experience with Girpi pipework.

40hrs a week £13.50 an hour.

No Digs or Travel ...

Our client in the West Yorkshire area have an immediate requirement for a an apprentice trained Pipe Fitter to join their existing engineering team.

Ideal candidates will be well versed in pipe fitting and fabrication of stainless steel.

This is a temp to perm position.

...

Our client is a leading manufacturer of prefabricated / modular pipework systems. They currently require an experienced Pipefitter to work in their busy facility in Worcester on the afternoon shift (2pm to 10pm) to prepare screw threaded pipework on a static pipe-threading machine. Additional duties will include pipework assembly and general duties. 13 week contract with the possibility to transfer to permanent employment after this period.

...

Pipe fitter
(Steel or Plastics Experience)
£12 - £14 p/h Ltd, 3 Month Contract, Start 14th May

Through winning a number of major projects with several global businesses in the UK and Overseas, this global supplier of tanks and process plant has experienced a major upturn in work and urgently needs to recruit an experienced pipe fitter for a long term contract. With a number of these projects expected to last several years, this is an exciting role for an experienced pipe fitter and with the client looking to interview over the next week, send your CV now to be in with a chance of success.

The successful fabricator...

Our client, based in Northumberland, are a well-established company providing Mechanical, Pipework & Steelwork Fabrication & Installation solutions throughout the UK. Due to a consistent and steadily increasing work load, they are looking to recruit a pipefitter for an immediate start.

Requirements of the role:

• Ideally time-served
• Experience working with carbon steel and stainless steel pipework
• Experience working within the oil and gas sector would be an advantage

They are able to be very competitive with their pay rates and are interested in seeing candidates with various rate expectations.

We are...

We have an immediate requirement for the following. 6 Welders - stainless steel doing positional welding of stainless steel pipework to Sellafield build level 1 standards. We also have a position for 6 pipefitters who will be cutting, prepping, fitting up and tacking of stainless steel ready for welding plus installation of vessels valves and equipment. This is a 15 month contract paying 14.95 per hour on a 56 hour week. Please e-mail ...

We require a Plumber/pipefitter for 1 months commercial installation work. You must have experience plumbing/fitting and hold a valid CSCS card. ...

Plumber/fitter required for 1 months commercial work in Cambridge. You will need to be an experienced plumbing and pipefitter and hold a valid CSCS card. ...

Discipline: Pipefitter Working Foreman StartDate: asap Location: Talisman Montrose WorkScope: Construction & Engineering Certification Required: Survival, MIST, Medical, PF010, PF018, PF019 ...

Discipline: Instrument Pipefitters x 3Start Date: asap Duration: 7+ days Location: Talisman Clyde Work Scope: Construction &Engineering CertificationRequired: (Survival, Mist, Medical) Small bore Tubing course (MJI12) + pre the PF010 (MJI10) Training Required: Drug screen, ISSOW, DVD etc ...

A leading pipework company that specialises in Commercial installations, renovations, and refurbishments currently has a requirement for commercial pipe fitters to install commercial pipe work, screw barrel, fixtures and fittings for a commercial project based near Uxbridge.

Job Responsibilities:

As a Commercial Pipe fitter

mechanical installations screw barrel pipe work

Replacement of old pipe work, radiators, hot water systems

Bracket work

Near Uxbridge

Contract - £13ph to £14.50 per hour ltd or CIS

Preferred Skills:

Mechanical Fitting

Pipe Fitting

Screw...

Welders required, must be ASME9 Coded and have experience working with 2-8 inch carbon steel pipe, 6inch welds, stick welding. MWEP/IPAF/CSCS card also required.

Pipe fitters required with rigging experience, slinging 8inch pipe.

Industrial experience is a must ...

Instrument Pipe Fitter required for 12 to 20 weeks work on an industrial project. Must have experience working on a heavy industrial sites. ...

The position will involve welding hydraulic pipe. You will need to be coded in Tig and have reasonable working experience within the industry. ...

Heavy duty pastic work.

Must hold valid indate CSCS/JIB/ skill card

full PPE and tools ...

Pipe Fitter/Welders, Coded Pipe/Steel Welders, Pipe Fitter Fabs, Plater Welders

Required for site and fab shop work in areas such as Gt Yarmouth, Lowestoft, Norwich, Bridgewater, Poole, Weymouth, Cantley, Bury St Edmunds, Haverhill, Kings Lynn, Wisbech, Peterborough, Spalding, Bristol

Fitting/welding of stainless steel 1 inch - 4 inch Dairy Shedule and schedule. 10 pipework fabrication fitting of brackets, working from drawings. Coded or prev coded in Tig/MMA Pipe Weld.
Previous Experience, C G OR NVQ, CSCS or ECS Card.
Must be confident with welding thin wall stainlees pipe, small weld test to be completed on 2 inch pipe...