Intech Recruitment Ltd |
| Contact |
Chris Powell |
|
| Telephone |
0870 909 3388 |
| Email |
admin@intech-online.co.uk |
| Website |
http://www.intech-online.co.uk |
| Address |
The Stables
, Wrest Park
, Silsoe
, Bedfordshire
, MK45 4HS |
| Description |
| Specialist in the supply of Contract & Permanent staff within the Technical Engineering & Manufacturing Sectors.Intech Recruitment cover the full range of disciplines in Technical, Manufacturing, Mechanical, Electrical, Electronic and service from blue collar workers to management. |
 |
|
 |
 |
|
 |
|
 |
|
|
| Job Title |
Pump Fitter |
| Location |
Bedfordshire, Bedfordshire |
| Salary/rate |
£13.50 - £14/hour N/A |
|
|
|
|
| Job number |
107311692 |
|
|
| Posted |
04/07/2008 (15:19) |
|
|
| Agency/Employer |
Intech Recruitment Ltd |
|
|
Description
|
Mechanical Fitter, Pump Fitter, Workshop Fitter
£14ph
Ongoing Contract
Bedfordshire
A large engineering services company, with 8 sites UK wide who specialise in the maintenance and repair of pumps and motors in a range of industries including Water Treatment, Industrial and Commercial currently require the services of a Mechanical Fitter with strong experience of stripping, fault finding and repairing a variety of pumps and motors.
The role will involve travelling client sites including clean and dirty water plants and removing faulty pumps & motors, taking them back to the workshop and refurbishing them and then re-commissioning them onsite.
Suitable candidates will have previous experience of working as a Mechanical Fitter / Pump Fitter and be competent in the stripping and refurbishment of a range of pumps & motors.
For more information and to apply for this position, please send your CV with a covering email to explain why you feel you should be considered for this post.
|
|
|
|
|
| Job type |
Contract |
|
|
| Contract length |
Ongoing |
|
|
| Start date |
asap |
|
|
|
|
| Contact name |
Matthew Crowe |
|
|
| Ref no |
MC-3096-PF |
|
|
|
|
|
|
|
|
|
|
|
|
| Job Title |
Fabricator Welder |
| Location |
Berkshire, Berkshire |
| Salary/rate |
£13 - £14/hour N/A |
|
|
|
|
| Job number |
107325203 |
|
|
| Posted |
04/07/2008 (15:19) |
|
|
| Agency/Employer |
Intech Recruitment Ltd |
|
|
Description
|
Fitter Welder
£13-14ph Ltd
50hrs+
Ongoing
Berkshire
A leading maintenance and fabrication company currently require the services of an experienced all-round Fabricator Welder to assist them with their upcoming Water Treatment projects.
The successful candidate will be responsible for travelling to water treatment sites and stripping out faulty equipment (access platforms, walkways, gantries) and either repairing onsite or taking back to the workshop.
Previous experience as a Fabricator Welder is essential as is the ability to read drawings, be used to working to closed tolerances and also working to tight deadlines.
Welding and Fabrication experience is essential.
Safety Boots and own PPE required.
For more information and to apply for this position, please send your CV with a covering email to explain why you feel you should be considered for this post.
iNTECH Recruitment Ltd are experts in the recruitment of technical staff within the Manufacturing and Engineering industry, this includes electronic, electrical and mechanical engineering disciplines. We act as both an employment agency for all permanent positions and as an employment business for temporary contract positions.
Unless otherwise stated, if applying for a job within the European Union, you must ensure that you are already authorised to work there.
|
|
|
|
|
| Job type |
Contract |
|
|
| Contract length |
Ongoing |
|
|
| Start date |
asap |
|
|
|
|
| Contact name |
Matthew Crowe |
|
|
| Ref no |
MC-3023-FW |
|
|
|
|
|
|
|
|
|
|
|
|
| Job Title |
Electrical Maintenance Engineer |
| Location |
Bedfordshire, Bedfordshire |
| Salary/rate |
£15 - £16/hour N/A |
|
|
|
|
| Job number |
107326867 |
|
|
| Posted |
04/07/2008 (15:18) |
|
|
| Agency/Employer |
Intech Recruitment Ltd |
|
|
Description
|
Job title: Maintenance Engineer (Electrical Bias)
Salary/Rate: £15 per Hour
Shift Work: 6am- 2pm / 2pm – 10pm
Area: Flitwick
INTECH is currently recruiting for an electrical maintenance engineer to work on a double day shift 6 – 2 / 2 – 10 for a production company based in Flitwick.
The role will be to perform electrical maintenance on their production machinery and to fault find when problems occur. The ideal candidate will have mechanical experience as well as electrical experience.
You will be qualified to 16th edition and have experience with:
·Pumps
·Motors
·PLC
·Special machinery
·Hydraulics
·Fault finding
·Schematics
For more information and to apply for this position, please send your CV with a covering email to explain why you feel you should be considered for this post.
iNTECH Recruitment Ltd are experts in the recruitment of technical staff within the Manufacturing and Engineering industry, this includes electronic, electrical and mechanical engineering disciplines. We act as both an employment agency for all permanent positions and as an employment business for temporary contract positions.
Unless otherwise stated, if applying for a job within the European Union, you must ensure that you are already authorised to work there.
|
|
|
|
|
| Job type |
Contract |
|
|
| Contract length |
6 Months+ |
|
|
| Start date |
asap |
|
|
|
|
| Contact name |
Matthew Crowe |
|
|
| Ref no |
MC-3349-EE |
|
|
|
|
|
|
|
|
|
|
|
|
| Job Title |
CNC Miller |
| Location |
Bedfordshire, Bedfordshire |
| Salary/rate |
£11/annum N/A |
|
|
|
|
| Job number |
107326350 |
|
|
| Posted |
03/07/2008 (16:20) |
|
|
| Agency/Employer |
Intech Recruitment Ltd |
|
|
Description
|
CNC Miller
£11ph PAYE
Temp to Perm
Bedfordshire, Cambridgeshire, Hertfordshire
A leading manufacturer of special purpose machinery currently require the services of a CNC miller on a 6 months contracts.
The role will involve the setting, operating and programming of a CNC Milling or machining centre with fanuc / heidenheim.
Previous experience in a similar role is essential.
For more information and to apply for this position, please send your CV with a covering email to explain why you feel you should be considered for this post.
iNTECH Recruitment Ltd are experts in the recruitment of technical staff within the Manufacturing and Engineering industry, this includes electronic, electrical and mechanical engineering disciplines. We act as both an employment agency for all permanent positions and as an employment business for temporary contract positions.
Unless otherwise stated, if applying for a job within the European Union, you must ensure that you are already authorised to work there.
|
|
|
|
|
| Job type |
Permanent |
|
|
| Contract length |
Temp to Perm |
|
|
| Start date |
asap |
|
|
|
|
| Contact name |
Matthew Crowe |
|
|
| Ref no |
mc-3645-cnc |
|
|
|
|
|
|
|
|
|
|
|
|
| Job Title |
Electrical Engineer / Electrical Design Engineer |
| Location |
Dorset, Dorset |
| Salary/rate |
£20 - £24/hour N/A |
|
|
|
|
| Job number |
107326348 |
|
|
| Posted |
03/07/2008 (16:19) |
|
|
| Agency/Employer |
Intech Recruitment Ltd |
|
|
Description
|
Job title:Electrical Engineer
Duration:6 Month Contract (possibly perm)
Salary/Rate:£ 22-25 per hour Ltd
Location:Dorset
A fantastic opportunity to join a world-leading manufacturer of fluid control systems as an Electrical Engineer.
Suitably qualified Electrical Engineers should have a general understanding of the design and documentation of the electrics of industrial equipment and be familiar with 3 phase systems, relays, Control Panel layouts, wiring and direct on-line motor starters.
Previous experience in an Industrial Electric Design Role is required along with good general IT awareness and the ability to use AutoCAD and MS Office, previous knowledge of PLC's would be advantageous.
For more information and to apply for this position, please send your CV with a covering email to explain why you feel you should be considered for this post.
iNTECH Recruitment Ltd are experts in the recruitment of technical staff within the Manufacturing and Engineering industry, this includes electronic, electrical and
|
|
|
|
|
| Job type |
Contract |
|
|
| Contract length |
6 Months |
|
|
| Start date |
asap |
|
|
|
|
| Contact name |
Matthew Crowe |
|
|
| Ref no |
MC-2938-ED |
|
|
|
|
|
|
|
|
|
|
|
|
| Job Title |
Sheet Metal Worker / Welder |
| Location |
Berkshire, Berkshire |
| Salary/rate |
£13 - £14/hour N/A |
|
|
|
|
| Job number |
107326347 |
|
|
| Posted |
03/07/2008 (16:19) |
|
|
| Agency/Employer |
Intech Recruitment Ltd |
|
|
Description
|
Sheet Metal Worker / Welder
£14ph
50-60 hours
Berkshire
A leading manufacturer within the Oil and Gas industry currently requires the Services of a Sheet Metal Worker on a contract basis due to the continued strength of their products.
The successful candidate will be responsible for setting and operating an Amada CNC punch press, rolling of stainless steel into cylinders, end capping and spot welding / TIG welding.
Previous experience of working as a sheet metal worker in a similar environment is essential.
For more information and to apply for this position, please send your CV with a covering email to explain why you feel you should be considered for this post.
iNTECH Recruitment Ltd are experts in the recruitment of technical staff within the Manufacturing and Engineering industry, this includes electronic, electrical and mechanical engineering disciplines. We act as both an employment agency for all permanent positions and as an employment business for temporary contract positions.
Unless otherwise stated, if applying for a job within the European Union, you must ensure that you are already authorised to work there.
|
|
|
|
|
| Job type |
Contract |
|
|
| Contract length |
Ongoing |
|
|
| Start date |
asap |
|
|
|
|
| Contact name |
Matthew Crowe |
|
|
| Ref no |
MC-2861-SMW |
|
|
|
|
|
|
|
|
|
|
|
|
| Job Title |
Panel Wirer |
| Location |
Hitchin, Hertfordshire |
| Salary/rate |
£10 - £12/hour N/A |
|
|
|
|
| Job number |
112127573 |
|
|
| Posted |
01/07/2008 (17:23) |
|
|
| Agency/Employer |
Intech Recruitment Ltd |
|
|
Description
|
Job title: Wirer X 2
Salary/Rate: £12 per hour ltd rate
Area: Hertfordshire
Intech is currently recruiting for X2 panel / machine wires for an ongoing contract.
55 hours per week
2 hours per day overtime
Overtime on Saturday mornings
Immediate start
For more information and to apply for this position, please send your CV with a covering email to explain why you feel you should be considered for this post.
iNTECH Recruitment Ltd are experts in the recruitment of technical staff within the Manufacturing and Engineering industry, this includes electronic, electrical and mechanical engineering disciplines. We act as both an employment agency for all permanent positions and as an employment business for temporary contract positions.
Unless otherwise stated, if applying for a job within the European Union, you must ensure that you are already authorised to work there.
|
|
|
|
|
| Job type |
Contract |
|
|
| Contract length |
ongoing |
|
|
| Start date |
asap |
|
|
|
|
| Contact name |
Ross Davies |
|
|
| Ref no |
3613-RD-panel wirer |
|
|
|
|
|
|
|
|
|
|
|
|
| Job Title |
COMMISSIONING AND SERVICE ENGINEER |
| Location |
Bedfordshire, Bedfordshire |
| Salary/rate |
£20000 - £25000/annum car + overtime + pension + health co |
|
|
|
|
| Job number |
107303319 |
|
|
| Posted |
01/07/2008 (09:38) |
|
|
| Agency/Employer |
Intech Recruitment Ltd |
|
|
Description
|
Commissioning and Service Engineer
A new position has become available for a commissioning and service engineer to work for our client a reputable manufacturer and solution provider of optical vision inspection systems to the printing industry.
Suitable applicants will be willing to travel throughout Europe around 50% of the time with trips containing 3 to 5 days, mainly Germany, France and Italy so a second language would be useful.
This is an interesting opportunity and is a varied and challenging role. To apply for this vacancy you will be able to demonstrate the ability to install, configure, Test and repair electrical equipment, machinery and instrumentation. This will consist the alignment and installation of optical equipment, sensors, switches and PC compatibility and diagnosis.
In essence you will have skills and experience with most of the above, be electro-mechanical with a strong electrical biased and relevant Electrical, electronics qualification. Special purpose machinery background would be advantageous, also a keen graduate engineer would be considered for this post.
In return a salary of up to £20,000 - £35,000 + Overtime + Company Car + Pension + Health Cover + 25 Days holiday and £35.00 per day oversees allowance is on offer.
Area: Must be located within commuting distance of Bedford
For more information and to apply for this position, please send your CV with a covering email to explain why you feel you should be considered for this post.
iNTECH Recruitment Ltd are experts in the recruitment of technical staff within the Manufacturing and Engineering industry, this includes electronic, electrical and mechanical engineering disciplines. We act as both an employment agency for all permanent positions and as an employment business for temporary contract positions.
Unless otherwise stated, if applying for a job within the European Union, you must ensure that you are already authorised to work there.
|
|
|
|
|
| Job type |
Permanent |
|
|
| Contract length |
perm |
|
|
| Start date |
asap |
|
|
|
|
| Contact name |
Ross Davies |
|
|
| Ref no |
2215-RD-CE |
|
|
|
|
|
|
|
|
|
|
|
|
| Job Title |
Powertrain Design Engineer |
| Location |
Northamptonshire, Northamptonshire |
| Salary/rate |
£25 - £28/hour N/A |
|
|
|
|
| Job number |
107323925 |
|
|
| Posted |
27/06/2008 (15:59) |
|
|
| Agency/Employer |
Intech Recruitment Ltd |
|
|
Description
|
Job advert:
Design Engineer (ProE Wildfire)
Northamptonshire
£25-30ph
An industry leading designer and manufacturer of motor sport equipment currently requires the services of two experienced Design Engineers with ProE Wildfire 2 experience on an initial 3 month contract.
Suitable Design Engineers will have a minimum of 3 years experience of using ProE Wildfire 2 and have experience of automotive base engine.
For more information and to apply for this position, please send your CV with a covering email to explain why you feel you should be considered for this post.
iNTECH Recruitment Ltd are experts in the recruitment of technical staff within the Manufacturing and Engineering industry, this includes electronic, electrical and mechanical engineering disciplines. We act as both an employment agency for all permanent positions and as an employment business for temporary contract positions.
Unless otherwise stated, if applying for a job within the European Union, you must ensure that you are already authorised to work there.
|
|
|
|
|
| Job type |
Contract |
|
|
| Contract length |
6 Months |
|
|
| Start date |
asap |
|
|
|
|
| Contact name |
Matthew Crowe |
|
|
| Ref no |
MC-3636-DE |
|
|
|
