Premier Technical Recruitment |
| Contact |
Paul Simcox |
 |
| Telephone |
01827 68400 |
| Email |
Paul.simcox@premiertechnicalrecruitment.co.uk |
| Website |
http://www.premiertechnicalrecruitment.com |
| Address |
Tamworth
, Staffordshire
, |
| Description |
Premier Technical Recruitment Ltd is an engineering
and technical recruitment consultancy that specialise
in the introduction and placement of Permanent high
calibre engineering professionals throughout the UK
in a range of specialist sectors. |
 |
|
 |
|
 |
|
|
| Job Title |
Commissioning Engineer |
| Location |
East Midlands, UK |
| Salary/rate |
£33000 - £50000/annum ote |
|
|
|
|
| Job number |
107387699 |
|
|
| Posted |
20/11/2008 (14:25) |
|
|
| Agency/Employer |
Premier Technical Recruitment |
|
|
Description
|
Turbine Commissioning Engineer – Basic c £33k – OTE c£50k
Our client is an internationally renowned market leader in the manufacture of bespoke control systems for a range of special purpose Gas and steam turbines applications for Blue Chip customers worldwide, and as a result of continued success and a planned programme of strategic growth, are seeking to recruit an enthusiastic and self motivated Commissioning Engineer who is able to demonstrate relevant experience in this technically demanding arena.
The successful candidate will be responsible for Supporting Control / Instrumentation and Auxiliaries systems on Gas Turbine Driven Generating Sets, utilising Rolls Royce Avon or Olympus Gas Generators for both UK On Shore located Power Stations, and Off Shore North Sea Platform locations.
It is essential that candidates wishing to be considered for this post be able to demonstrate the essential flexibility required to provide rapid response to breakdown Call Outs for On Shore locations as well as support for Off Shore locations when necessary, in addition to undertaking scheduled service / maintenance visits to check and calibrate Instrumentation and Auxiliary systems at the On Shore Locations and Re-Commissioning of machinery after these service and maintenance visits.
Occasional visits to Overseas locations may also be required, although during periods where attendance at site is not required, work in the East Midlands office environment will be allocated, and is likely to include procedure preparation, spares assessments, in-house repairs on customer equipment and assisting with ongoing project work.
In order to be considered for this unique, challenging and highly rewarding opportunity, the successful candidate will demonstrate extensive knowledge of PLC based Control systems with associated MMI, SCADA packages and ideally familiarity with Woodward NETCON. Additionally demonstrable knowledge of Gas Turbines, Rotating machinery and hydraulic systems and the Power Generation Industry in general is essential.
To be considered for this position, due to the safety critical nature of the role, it is essential that you be able to demonstrate at least 1 years experience of dynamically commissioning an industrial Gas or steam Turbine system, alongwith with formal qualifications in Electrical / Mechanical Engineering and a clean driving licence.
Of interest ? Then contact the Commissioning Team at Premier Technical Recruitment on 01827 68400 or email your cv in the strictest confidence to commissioning@premiertechnicalrecruitment.co.uk for more information.
|
|
|
|
|
| Job type |
Permanent |
|
|
| Contract length |
Permanent |
|
|
| Start date |
Immediate |
|
|
|
|
| Contact name |
Paul Simcox |
|
|
| Ref no |
PTYR08/441 |
|
|
|
|
|
|
|
|
|
| Job Title |
Aftermarket Sales / Proposals Engineer |
| Location |
West Midlands, UK |
| Salary/rate |
£26000 - £32000/annum benefits |
|
|
|
|
| Job number |
118295470 |
|
|
| Posted |
20/11/2008 (14:08) |
|
|
| Agency/Employer |
Premier Technical Recruitment |
|
|
Description
|
Aftermarket Sales and Proposals Engineer (Water) – West Midlands – to £30k
Our client specialize in the design and supply of equipment used in the treatment of domestic and industrial water and wastewater, and as a result of recent positive restructuring and a series of strategic acquisitions that have provided the organisation with recognized trademarks, cutting edge technology and access to new markets including sea water desalination and energy, they offer a complete range of both solutions and products on a Global basis and are seeking to recruit an experienced Aftermarket Sales and Proposals Engineer to compliment their existing team.
Reporting to the Aftermarket Manager within the Utilities Division, the successful candidate will be responsible for performing a range of proactive sales and account management activities including (but not limited to) :
•preparing quotes and following up enquiries for all company products
•Account management with customers, maintaining strong working relationships and requiring regular site visits, inspections and surveys
•Interpreting potential customer's requirements and selecting relevant spare / replacement parts from the company product range
•Utilising internal systems (contract records/machine parts lists etc) and liaising with internal departments and external suppliers to establish the parts required and costs
•Producing quotations for the parts required and submitting these to the customer
•Following up quotations with customers and providing assistance to secure orders
•Acknowledging receipt of orders and entering details onto the system for processing
To be considered for this diverse and challenging opportunity within a dynamic team based and highly regarded environment, you will demonstrate a relevant engineering qualification, ideally supported by Water / Waste water or related industry experience although previous Proposal, Quotation or Design experience will also be favourably considered. Additionally you will possess strong IT Skills, exceptional verbal and written communication skills as you would expect for such a customer facing role, and will demonstrate comprehensive planning and organization skills and the ability to work to tight deadlines and under pressure in a flexible manner.
This is an exceptional opportunity for a suitably focused, dynamic and self motivated sales and business development professional with demonstrable proposals skills and experience to progress their career within a professional, stable and progressive environment – are you ready for the next challenge in your career?
Then contact the Sales Team at Premier Technical Recruitment on 01827. 68400 or email your cv in the strictest confidence to sales @ p-t-r. co. uk for further details.
|
|
|
|
|
| Job type |
Permanent |
|
|
| Contract length |
Permanent |
|
|
| Start date |
Immediate |
|
|
|
|
| Contact name |
Paul Simcox |
|
|
| Ref no |
PTR08/440 |
|
|
|
|
|
|
|
|
|
| Job Title |
Software Engineer |
| Location |
Leicester, Leicestershire |
| Salary/rate |
£28000 - £36000/annum to £36k plus benefits |
|
|
|
|
| Job number |
107324452 |
|
|
| Posted |
19/11/2008 (19:51) |
|
|
| Agency/Employer |
Premier Technical Recruitment |
|
|
Description
|
Software Engineers – to £36k + benefits - Leicester
Our client is recognized as a market leader in the provision of bespoke integrated solutions to the automated handling sector, and as a result of continued success and a planned programme of strategic growth, are seeking to recruit experienced Electrical and Control Systems Engineers of all levels to compliment their existing team.
Tasked with producing and maintaining state of the art software written in C++ / C# / ASP.net using Visual Studio 2003/2005 running under a Windows Server 2003 o/s, you will additionally demonstrate sound knowledge and experience of OOD using UML techniques, and developing software with relational databases (such as Oracle).
Candidates will be involved in the full system development lifecycle for a range of plant control applications, so this is considerably more than simply a “coding role” and successful candidates will demonstrate a desire to forge a career working as part of a larger team – so communication skills and drive and self motivation are essential requirements.
As a systems integrator, the organisation work closely with its customer to ensure their needs are satisfied through the provision of “best in class” process solutions, and it is therefore essential that candidates be able to demonstrate effective communication, personal planning and organisational skills to meet these customer requirements.
To be considered for one of these exciting positions, you will possess a relevant software engineering qualification and ideally at least 3 years experience in a similar environment, demonstrating knowledge of Crystal Reports, Ajax, C, VB, HTML, Javascript and GUI design skills, with Oracle DB admin skills, Oracle 9.2i and 10g experience proving to be distinctly advantageous.
You will be additionally be responsible for the generation of associated design and test documentation, so experience gained within an ISO9001:2000 environment would also prove beneficial. In return, an excellent benefits package and structured career progression path are available for suitably experienced and committed Software Engineering professionals.
Interested and keen to learn more? Then contact the Controls Team at Premier Technical Recruitment on 01827 68400 or email your cv in the strictest confidence to controls@premiertechnicalrecruitment.co.uk for further information.
|
|
|
|
|
| Job type |
Permanent |
|
|
| Contract length |
N/A |
|
|
| Start date |
Immediate |
|
|
|
|
| Contact name |
Paul Simcox |
|
|
| Ref no |
PTR08/347 |
|
|
|
|
|
|
|
|
|
| Job Title |
Senior Mechanical Engineer |
| Location |
Birmingham, Birmingham |
| Salary/rate |
£35000 - £37000/annum to £37k plus benefits |
|
|
|
|
| Job number |
107331071 |
|
|
| Posted |
19/11/2008 (19:51) |
|
|
| Agency/Employer |
Premier Technical Recruitment |
|
|
Description
|
Senior Mechanical Engineer – Building Services – Birmingham to £37k + benefits
Our client excels in the provision of bespoke design solutions and systems allied to the Building Services sector, operating a range of divisions that include Energy, Environmental, Design, Construction and Facilities Management, and providing a fully integrated range of services to their customers.
With more than 100 qualified M&E Consulting Engineers operating at the forefront of Innovative and Passive Design Solutions, due to continuing success as part of a planned program of strategic growth, they are now seeking to recruit and enthusiastic and self motivated Senior Mechanical Building Services Engineer to provide design expertise on single and multi disciplinary projects, both new build and refurbishment projects for the public and private sector. Working as part of a multidiscipline team of fellow building services professionals, architects and structural engineers all providing comprehensive design services, this is an exceptional opportunity for a suitably experienced design engineer to gain additional senior experience within an internationally renowned consultancy, affording the opportunity to work on large scale multidiscipline projects.
To be considered for this exceptional opportunity, successful candidates will ideally have achieved a relevant HNC or degree qualification with IEng or CEng proving distinctly advantageous. Additionally, demonstrable design experience gained within a design consultancy at a senior design level is additionally welcome as well as a good level of computer literacy in Windows and dedicated related industry software packages, with an understanding of AutoCAD proving to be particularly beneficial. With excellent communication skills, the ability to make decisions and act on your own initiative, monitor financial aspects of projects as well as operating in a pro-active way and being able to make presentations to and attending meetings with clients, this post will challenge the most capable of electrical design engineers seeking their next progressive career move.
You will undertake electrical building services engineering design, from concept design and Project Management through to construction issue and site supervision, and be responsible for carrying out design calculations on a variety of buildings from both public and private sectors of work It is therefore essential that you be capable of preparing technical specifications and drawings for drafting by the in-house CAD team, and undertaking Site surveys and inspections and preparing associated reports, records and archives in line with required company standards. In return, an excellent benefits package and structured career progression path are available within one of the most highly respected consultancies in the UK. Interested ? Then contact the M&E Team at Premier Technical Recruitment on 01827 68400 or email your cv in the strictest confidence for further details.
|
|
|
|
|
| Job type |
Permanent |
|
|
| Contract length |
N/A |
|
|
| Start date |
Immediate |
|
|
|
|
| Contact name |
Paul Simcox |
|
|
| Ref no |
PTR08/356 |
|
|
|
|
|
|
|
|
|
| Job Title |
Controls Engineer |
| Location |
Peterborough, Cambridgeshire |
| Salary/rate |
£25000 - £35000/annum |
|
|
|
|
| Job number |
107260599 |
|
|
| Posted |
19/11/2008 (19:51) |
|
|
| Agency/Employer |
Premier Technical Recruitment |
|
|
Description
|
Controls Engineer - £25k to £35k dependant upon experience – Peterborough
Our client has been established for almost 25 years, and is acknowledged as one of the markets leading providers of automation and industrial process solutions to a range of diverse industry sectors.
Based in Peterborough, the company work on a diverse range of projects on a consultancy basis, and are involved in all aspects from initial conceptual design through to manufacture and commissioning.
As a result of continued success and a planned programme of strategic growth, they are now seeking to recruit an enthusiastic, self motivated, flexible and above all capable control software projects engineer to compliment their existing team.
To be considered for this exciting opportunity, you will be able to demonstrate a flair for bespoke control software development, skills in the use of both Allen Bradley PLC software (although any other platforms would prove to be advantageous) and SCADA (WonderWare InTouch or RS View) platforms and possessing exceptional communication and project management skills in order to ensure project delivery, both on time and in line with customer requirements.
As a global supplier of bespoke automation and process solutions, flexibility is a key attribute required for this role, and there is genuine scope for both UK and overseas travel.
Do you feel you have the relevant skills and experience to be considered for this exceptional opportunity within a technically challenging and diverse environment ?
If so, then contact Paul Simcox of Premier Technical Recruitment on 01827 68400 or email your current resume to paul.simcox@premiertechnicalrecruitment.co.uk detailing salary expectations and the reasons why you feel you are suited to the position.
|
|
|
|
|
| Job type |
Permanent |
|
|
| Contract length |
N/A |
|
|
| Start date |
Immediate |
|
|
|
|
| Contact name |
Paul Simcox |
|
|
| Ref no |
PTR08/281 |
|
|
|
|
|
|
|
|
|
| Job Title |
Electrical Design Engineer |
| Location |
Birmingham, Birmingham |
| Salary/rate |
£30000 - £35000/annum Plus benefits |
|
|
|
|
| Job number |
107331070 |
|
|
| Posted |
19/11/2008 (19:51) |
|
|
| Agency/Employer |
Premier Technical Recruitment |
|
|
Description
|
Electrical Design Engineer – Building Services – Birmingham to £35k + benefits
Our client excels in the provision of bespoke design solutions and systems allied to the Building Services sector, operating a range of divisions that include Energy, Environmental, Design, Construction and Facilities Management, and providing a fully integrated range of services to their customers.
With more than 100 qualified M&E Consulting Engineers operating at the forefront of Innovative and Passive Design Solutions, due to continuing success as part of a planned program of strategic growth, they are now seeking to recruit and enthusiastic and self motivated Electrical Building Services Engineer to provide design expertise on single and multi disciplinary projects, both new build and refurbishment projects for the public and private sector. Working as part of a multidiscipline team of fellow building services professionals, architects and structural engineers all providing comprehensive design services, this is an exceptional opportunity for a suitably experienced design engineer to gain additional and more senior experience within an internationally renowned consultancy, affording the opportunity to work on large scale multidiscipline projects.
To be considered for this exceptional opportunity, successful candidates will ideally have achieved a relevant HNC or degree qualification with IEng or CEng proving distinctly advantageous. Additionally, demonstrable design experience gained within a design consultancy at an intermediate design level is additionally welcome as well as a good level of computer literacy in Windows, Hevacomp, NES and Microsoft packages, with an understanding of AutoCAD proving to be particularly beneficial. With excellent communication skills, the ability to make decisions and act on your own initiative, as well as operating in a pro-active way and being able to make presentations to and attending meetings with clients, this post will challenge the most capable of electrical design engineers seeking their next progressive career move.
You will undertake electrical building services engineering design, from concept design through to construction issue and site supervision, and be responsible for carrying out design calculations on a variety of buildings within different sectors i.e. residential, commercial, educational, healthcare and leisure facilities etc. It is therefore essential that you be capable of preparing technical specifications and drawings for drafting by the in-house CAD team, and undertaking Site surveys and inspections and preparing associated reports, records and archives in line with required company standards. In return, an excellent benefits package and structured career progression path are available within one of the most highly respected consultancies in the UK. Interested ? Then contact the M&E Team at Premier Technical Recruitment on 01827 68400 or email your cv in the strictest confidence to design@premiertechnicalrecruitment.co.uk for further details.
|
|
|
|
|
| Job type |
Permanent |
|
|
| Contract length |
Permanent |
|
|
| Start date |
Immediate |
|
|
|
|
| Contact name |
Paul Simcox |
|
|
| Ref no |
PTR08/355 |
|
|
|
|
|
|
|
|
|
| Job Title |
Senior Mechanical Design Engineer |
| Location |
Oxfordshire, Oxfordshire |
| Salary/rate |
£30000 - £36000/annum plus benefits |
|
|
|
|
| Job number |
107368415 |
|
|
| Posted |
19/11/2008 (19:51) |
|
|
| Agency/Employer |
Premier Technical Recruitment |
|
|
Description
|
Senior Mechanical Design Engineer – to £36k – Oxfordshire
Our client specialise in the design, development and implementation of automated warehouse and distribution solutions for supply throughout the UK and Europe, and as a result of an ongoing exercise to strengthen the Design Team, a number of new permanent positions have been created for experienced and highly capable Design Engineers to compliment the existing department, culminating in the need to recruit an experience Senior person to report directly to the Mechanical Design Manager.
The successful candidate will be tasked with the design of the mechanical aspects of material handling systems for a range of bespoke customer requirements, in line with a given specification and within cost and time scale constraints, and will lead the mechanical design aspects of projects, interpreting project layouts and specifications into final design layout and conveyor datalist, and providing system integration drawings and specifications when required.
Additionally, you will review, check and approve unit cycle times, system throughput, and general dimensional requirements and develop a detailed design and manufacturing programme, giving advance notice of materials required to the Purchase Department and allocating design tasks to project related workload. You will also undertake the review, checking and approval of project related documentation. (i.e drawings, calculations, datalists etc) and assist with the system risk assessment (and unit risk assessment where necessary) in line with statutory requirements.
To be considered for this exciting opportunity with a genuine market leader in their specialist field, you will be able to create detailed drawings and parts lists for equipment within scope of supply, specify details of any additional special conveyor elements or associated equipment and create an installation file to pass on information to the site supervisor and installation team, creating detailed Operating and Maintenance Instructions and provide spare parts lists as required, and liaising with systems sales and project engineers during various project phases as well as with project managers, customer and sub-contractors during order execution phase.
You will therefore ideally possess relevant qualifications in Mechanical Engineering and preferably be able to demonstrate previous experience in the materials handling industry and with at least 3 years experience in a similar role. Able to demonstrate Initiative, Results Orientation, Decision Making skills and the Ability to Analyse and Organise, you will be a Team Player with excellent communication skills and the ability to work under minimum supervision. Interested ? Then contact the Materials Handling Team on 01827 68400 or email your cv in the strictest confidence to conveyor@premiertechnicalrecruitment.co.uk for further details.
|
|
|
|
|
| Job type |
Permanent |
|
|
| Contract length |
Permanent |
|
|
| Start date |
Immediate |
|
|
|
|
| Contact name |
Paul Simcox |
|
|
| Ref no |
PTR08/411 |
|
|
|
|
|
|
|
|
|
| Job Title |
Design Engineer |
| Location |
Derbyshire, Derbyshire |
| Salary/rate |
£28000 - £33000/annum Plus Benefits |
|
|
|
|
| Job number |
104132660 |
|
|
| Posted |
19/11/2008 (19:51) |
|
|
| Agency/Employer |
Premier Technical Recruitment |
|
|
Description
|
Design Engineer – Test Rigs
to £30k - Derby
Our client employs in excess of 9,000 people across the globe, have a presence in more than 15 countries and have an annual turnover in excess of £400m, and work on a consultancy basis to various market sectors that include Aerospace, Automotive and Nuclear sectors for both Defence and Energy applications. As a result of continued success and a planned programme of strategic growth, they are now looking to recruit an enthusiastic, self motivated and highly proficient Test Rig Design professional to compliment their existing team.
To be considered for this challenging role, the successful candidate will understand and contribute to the specification of rig test vehicle design problems including large structural rigs, spinning rigs, aerothermal rigs and specialist rigs for fan blade off and bird ingestion scenarios. You will therefore demonstrate strong problem solving abilities, design solution and decision making capabilities and be able to present work in an effective manner to technical and commercial project forums.
You will be able to work on multiple projects at any one time, both autonomously or as part of a motivated team and essentially will be able to work to both company and customer design specifications and timescales.
It is envisaged that the successful candidate will therefore demonstrate experience of theoretical and practical design engineering, ideally within an engine project or testing rig environment and demonstrate a good all round understanding of basic organisational and project management skills.
Experience of 3D and 2D modelling with Unigraphics NX2 or above is essential, and familiarity with PDM (Aerospace version), Teamcentre and MS Office is desirable although consideration will be given to alternative versions and packages.
Are you ready for the challenge of a lifetime within a dynamic team based environment offering exceptional scope to progress your career?
Then contact Paul Simcox at Premier Technical Recruitment on 01827 68400 or email your cv to design@premiertechnicalrecruitment.co.uk for a confidential discussion regarding your requirements.
|
|
|
|
|
| Job type |
Permanent |
|
|
| Contract length |
N/A |
|
|
| Start date |
Immediate |
|
|
|
|
| Contact name |
Paul Simcox |
|
|
| Ref no |
PTR08/247 |
|
|
|
|
|
|
|
|
|
| Job Title |
Design Engineer - Unigraphics |
| Location |
Derbyshire, Derbyshire |
| Salary/rate |
£28000 - £30000/annum Plus benefits |
|
|
|
|
| Job number |
104132662 |
|
|
| Posted |
19/11/2008 (19:51) |
|
|
| Agency/Employer |
Premier Technical Recruitment |
|
|
Description
|
Unigraphics Design Engineer to £30k Derby
Our client employs more than 9000 people worldwide, are represented in more than 15 countries and have an annual turnover in excess of £400m, and works on a consultancy basis to various market sectors that include Aerospace, Automotive and Nuclear sectors for both Defence and Energy applications.
As a result of continued success and a planned programme of strategic growth, they are now looking to recruit an enthusiastic, self motivated and highly proficient Unigraphics Design professional to compliment their existing instrumentation team.
The successful candidate will be responsible for the production of design schemes to define an instrumentation solution to a specified experimental requirement, and that will interface with customer processes to refine and issue solutions. This will predominantly involve placing Brackets and Bracketry around a Gas Turbine Test Rig taking the instrumentation around the Gas Turbine and would be undertaken whilst the engine is still under the design phase.
To be considered for this technically challenging and diverse opportunity, you will demonstrate the ability to comply with a complex and demanding customer interface in a professional and positive manner, and the ability to quickly absorb training in various software tools and design techniques – and will thrive in an environment committed to ensuring customer satisfaction and successful project delivery. You will be responsible for fully understanding the customer requirement, liaising internally with in house specialists and creating the design scheme to define the instrumentation solution, before following the project through to presentation to the customer.
You will have experience of Unigraphics NX2 and an awareness of aero-engines and instrumentation techniques would be distinctly advantageous. Strong communication skills are a prerequisite, and whilst a degree or relevant qualification would again be advantageous, demonstrable skills and experience are more important.
Do you have what it takes to join a major consultancy in the UK and progress your career within a fast paced and challenging design arena ?
If so, then contact Paul Simcox at Premier Technical Recruitment on 01827 68400 or email you | |
