 |
| Job Title |
|
Crash Safety Strategy Engineer |
| Location |
|
East Midlands, UK |
| Job Number |
|
104229582 |
| Posted |
|
09/02/2012 (15:25) |
| Agency/Employer |
|
Assystem UK Ltd |
Description
|
|
Assystem is looking to appoint a Crash Safety Strategy Engineer to support of an exciting new vehicle development programme. Nissan are looking to recruit a large number of Engineers to work in their European Technology Centre, Cranfield, Bedfordshire. We are looking to recruit engineers with experience in a variety of vehicle systems / areas to include Body, Chassis, Exterior Trim, Interior Trim, Electrical, Quality and Test.
The Crash Safety Strategy Engineer will be responsible for performance planning related to occupant protection and passenger safety.
Main Tasks & Responsibilities in the role of Crash Safety Strategy Engineer are as follows:
Strategy development of safety requirements for each project
Planning and performance of vehicle tests and validation of test results
Analysis of performance and results against predictions
Feedback and communication with design to assist in solving technical concerns relating to vehicle, occupant or pedestrian safety.
Analysis of European market requirements, Competitor Vehicles and vehicle safety trends
Background & Experience
Experience within Crash Safety, interior impact, pedestrian impact, Occupant Safety and whole vehicle crash
Experience of NCAP assessments in relation to competitor vehicle analysis beneficial
Minimum 2 years experience in automotive engineering
Key skills required:
Strong project management
Experience of managing data with ability to interpret data
Supplier management
Personal attributes:
Problem solving skills
Good organisational skills
Ability to communicate
Team player
Flexible attitude to working hours
Minimum Education Required
Technical Degree/Certification
Please contact Lisa Hunt on 01903 276761 or email your CV
|
| Job Type |
|
Contract |
| Contract Length |
|
N/A |
| Start Date |
|
01/08/2011 |
| Contact Details |
|
 |
|
|
|
|
|
| Job Title |
|
Crash Safety Engineer |
| Location |
|
West Midlands |
| Job Number |
|
104229576 |
| Posted |
|
09/02/2012 (14:58) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem are working on a preferred basis with a number of UK Automotive OEM's and their supply chain. With so many exciting vehicle programmes for UK, European and Japanese manufacturers currently being engineered, Assystem are now recruiting for Crash Safety Engineers
Our Clients are seeking Crash Safety Engineers for vacancies based in the Midlands area of the UK, across the following disciplines; Analysis, CAE, Test, Development or Strategy.
Skills Required:
-Previous experience of working with an Automotive OEM or supplier in a Crash Safety Environment using one of the following programmes or procedures: NASTRAN, PAMCRASH or NCAP
-Design, Development, Production or Manufacturing experience.
-Previous Crash Safety experience in one of the following areas; CAE, Analysis, Test, Strategy or Development.
Qualifications:
-Degree Qualified is desirable or equivalent experience within the Automotive Industry
Other:
-Applicants must be eligible to live and work in the UK
To discuss these opportunities in further detail, please contact our Recruitment Team on 01903 276740 or send your CV
|
| Job Type |
|
Contract |
| Contract Length |
|
N/A |
| Start Date |
|
18/01/2012 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Manufacturing Engineer |
| Location |
|
Surrey |
| Job Number |
|
104229567 |
| Posted |
|
09/02/2012 (14:29) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem currently require an experienced Manufacturing Engineer for a permanent vacancy with our client a leading Automotive Manufacturer in the South East UK.
This is a permanent vacancy paying a salary in the region of Circa £35,000pa.
The Role
Reporting to the Manufacturing Engineering Manager the role will consist of:
*Provide first hand support in the development and execution of all Manufacturing Engineering practices.
*Lead by example, working within own functional area as well as cross functionally
*Support and assist the Manufacturing Engineering team to drive improvement in the business areas of Project Management, Safety, Quality, Cost Management, People Development and Product Delivery.
*Support and assist the Manufacturing Engineering Team in scoping, specifying and delivering best operational practices in alignment with brand expectations.
Responsibilities:
Projects
*Support the manufacturing engineering team with the development of departmental budgets as contributor to overall program business cases.
*Assist with planning for the smooth integration of facilities, equipment and product.
*Support the wider business functions with the delivery of all program aspects from inception to series production and beyond.
*Assist with the analysis and collation of program end reports on all lessons learned
*Assist with the delivery of all objectives ensuring all project gateway milestones are achieved.
*Identify and report on program risk items ensuring corrective actions are in place preventing program delay.
*Support the Manufacturing Engineering Team in the generation of timing plans that support full program delivery activities.
Health and Safety
*Support the manufacturing engineering manager and wider business functions to ensure safe working practices are implemented and upheld.
*Support the manufacturing engineering manager and wider business functions to ensure all staff maintain and use appropriate PPE.
*Support in the investigation of near misses and accidents.
*Support the manufacturing engineering manager and wider business functions in ensuring cost effective productive maintenance schedules are identified and adhered to.
Quality
*Support the manufacturing engineering manager and wider business functions to ensure all quality targets are correctly specified and achieved.
*Support the manufacturing engineering manager in problem solving initiatives.
*Support the manufacturing engineering manager in the implementation of customer containment actions.
*Support the manufacturing engineering manager with continuous improvement initiatives.
*Support the Product Design Engineering team in identifying resolutions for product related. issues during the digital and prototype development phases to protect the product in the field and enhance brand strength.
Manufacturing:
*Support the manufacturing engineering manager in the generation of technical specification documentation when planning the procurement and installation of all major facilities and bespoke equipment items.
*Support the manufacturing engineering manager in the development of all vehicle assembly process feasibility activities:
oDesign Reviews
oPFMEA
oDFMEA
oLine Balancing
oAssembly sequencing, Process Documentation and Product Traceability methodology
oHours Per Car generation / reporting
oFacility layout planning
*Support the manufacturing engineering manager in the investigation of any malpractice resulting in damage, loss or impediment to tooling and equipment.
Cost
*Assist the control of cost drivers for the manufacturing engineering team.
*Initiate cost control and cost improvement activities.
*Conduct work studies to routinely line balance and improve efficiency.
*Support the Manufacturing Engineering Manager in the achievement of the departmental budget.
*Ensure all equipment is logged for asset control and insurance check.
Other
*Work closely with, Quality Engineering, Supplier Quality Assurance and Production Planning to coordinate the smooth introduction into production of new models and derivatives.
*Work closely with the Engineering and Development organisation throughout to ensure the products are brought to market on time, on budget at the required quality and volume ramp levels
*Carry out any other tasks required by business needs
Personal Specification
*The candidate will have PFMEA, DFMEA and Design Review experience.
*The candidate will have Line balancing and Facility layout planning experience
*Have experience in the field of high performance vehicle manufacturing.
*Have experience with the specification and procurement of major assembly equipment
*Have experience in the planning and execution of new vehicle programs
*Have experience in the field of complex vehicle systems.
*Have experience in the area of automated component installation systems
Our client offers a salary in the region of Circa £35,000 pa + an excellent Benefits package to the successful applicant.
If Interested and you would like to know more or send your CV to be considered, please contact Ben Chamberlain at or call the office on 01903 276751
|
| Job Type |
|
Permanent |
| Contract Length |
|
N/A |
| Start Date |
|
|
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Paint Process Engineer |
| Location |
|
Surrey |
| Job Number |
|
104229539 |
| Posted |
|
09/02/2012 (12:31) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Our client a world renowned Automotive Manufacturer are currently seeking an experienced Paint Process Engineer to join their engineering division and report to the Manufacturing Engineering Manager.
The Role:
The Paint Process Engineer will report to the Manufacturing Engineering Manager and assist the Paint Unit in the following disciplines:-
Role Dimensions:
The Paint Process Engineer will be expected to:
*Provide first hand support in the development and execution of all paint processes and implementation and testing of all new products.
*Lead by example, working within own functional area as well as cross functionally
*Support and assist the Paint Unit to drive improvement in the business areas of Supplier Management, Safety, Quality, Cost Management, and Product Delivery.
*Support and assist the Paint Unit in scoping, specifying and delivering best operational practices in alignment with brand expectations.
Responsibilities:
Projects
*Assist with planning for the smooth integration of facilities, equipment and new products
*Produce/maintain paint process instructions and database to enable the transformation of the engineering product specification into the relevant paint documentation standard.
*Carry out Paint feasibility studies for product specifications compiling change requests/reports as required.
*Implement audit of paint operations against the process instructions ensuring conformity to instructions.
*Instigate actions where instructions are not being followed. Investigate new developments, innovations and paint techniques, making optimum use of techniques and materials to achieve quality & process improvements.
*Assist with the defect analysis and collation of program end reports on all lessons learned
*Identify and report on program risk items ensuring corrective actions are in place preventing program delay
Health and Safety
*Support the Paint Unit and wider business functions to ensure safe working practices are implemented, upheld and all staff maintain and use appropriate PPE
*Support the Paint Unit and wider business functions in ensuring cost effective productive maintenance schedules are identified and adhered to
Quality
*Support the Paint Unit and wider business functions to ensure all quality targets are correctly specified and achieved
*Support the Paint Unit in problem solving initiatives and RFT maintenance.
*Support the Paint Unit in the raising of BCR's and ensuring that they are kept updated.
Manufacturing:
*Support the Paint Unit in the generation of technical specification documentation when planning the procurement and installation of all major facilities and bespoke equipment items.
*Support the Paint Unit in the development of all vehicle assembly process feasibility activities:
oPFMEA
oDFMEA
oPaint sequencing, Process Documentation and Product Traceability methodology
oHours Per Car generation / reporting
*Support the Paint Unit in the investigation of any malpractice resulting in damage, loss or impediment to tooling and equipment
Cost
*Assist the control of cost drivers for the manufacturing engineering team
*Initiate cost control and cost improvement activities
*Conduct work studies to routinely line balance and improve efficiency
*Support the Paint Unit in the achievement of the departmental budget
*Ensure all equipment is logged for asset control and insurance check
*Work closely with, QES, SQA and Production Planning to coordinate the smooth introduction into production of new models and derivatives
*Work closely with the Engineering and Development organisation throughout phases to ensure the products are brought to market on time, on budget at the required quality and volume ramp levels
Education:
Candidates will be either Educated to a relevant level within an appropriate engineering discipline or show experience of working within a Manufacturing environment (Automotive) on Paint Process improvement.
Our client offers a competitive salary and excellent benefits
To apply for this permanent vacancy, please contact Ben Chamberlain on 01903 276751 or e-mail your CV with covering letter
|
| Job Type |
|
Permanent |
| Contract Length |
|
N/A |
| Start Date |
|
|
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Automotive Body Engineer |
| Location |
|
Wiltshire |
| Job Number |
|
104229521 |
| Posted |
|
09/02/2012 (11:21) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Our Client, an internationally renowned major OEM based in the UK, requires an Automotive Body Engineer to work in their Design & Test Engineering Department.
BODY ENGINEER:
*BIW development
*Localisation
*Special Edition model development
*VA idea generation & implementation
*Vehicle & Parts teardown analysis
*Benchmarking
MAIN RESPONSIBILITIES:
*BIW structure concept generation
*Cost, weight and technical feasibility
*Drawing creation, modification, check & release
*Competitor parts analysis
*Localised parts development & maturation
*Confirmation of SPEC test results
*Market Quality concern investigation
*Motorshow research
QUALIFICATIONS, SKILLS AND EXPERIENCE REQUIRED:
*Catia v5.
*Ability to direct & oversee upper body development.
*Knowledge of Plastics, Rubber, Metals, Paint and manufacturing / joining methods.
*Welding, Stamping, mechanical etc.).
*Supplier development.
*Be proactive and demonstrate high level of self motivation to deliver results.
*An adept communicator, be able to build good relationships across all cultures both
*internally and externally.
*Competence in a European language is desirable but not essential.
*Occasional travel overseas Will be required.
We welcome applications from individuals who are keen to adopt a new challenge. Please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Permanent |
| Contract Length |
|
N/A |
| Start Date |
|
|
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Automotive Exterior Engineer |
| Location |
|
South West England, South West |
| Job Number |
|
104229519 |
| Posted |
|
09/02/2012 (11:12) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem are currently working with an internationally renowned major OEM based in the UK who requires a team of Automotive Exterior Engineers to join their Design & Testing Engineering - Frame Section Department. The successful candidates will report directly to the Frame Section Manager. These positions are based in The South West of England.
ROLE:
To support the FRAME (Body-Exterior-Interior) engineering section of the client.
Provide technical capability for development, production & quality of automotive exterior
parts/systems (e.g. wiper, washer, glazing, sunroof, door & tailgate systems).
MAIN RESPONSIBILITIES:
*Creation of drawings and specifications for parts/systems for new vehicle variations and
European special editions.
*As necessary, support of testing in order to verify that parts quality meet with relevant company standards.
*Main emphasis will be on exterior design & development but there will be an expectation to support other FRAME section parts as necessary.
*Support for analysis & countermeasure of warranty issues, working with R&D Japan,
factory, service and suppliers.
*Cost reduction activities; research and analysis of proposals from suppliers, vehicle
teardown and own research.
*Supplier liaison to localise components for the company's factories in the UK and Turkey.
*Research of advanced technology trends through benchmarking, technology
investigation, conferences, etc and report results within the company's R&D globally, as well as to management.
QUALIFICATIONS, SKILLS AND EXPERIENCE REQUIRED:
*Either university degree in automotive engineering or demonstrable experience with
either an OEM or automotive parts supplier.
*CATIA V5 2D/3D & analytical software skills are desirable.
*Be proactive and demonstrate high level of self motivation to deliver.
*Excellent PC skills - particularly Microsoft Excel & PowerPoint.
*They will need to have a flexible attitude and be responsive to changes.
*The role will require occasional travel overseas.
*An adept communicator, be able to build good relationships across all cultures both
internally and externally.
DESIRABLE:
Japanese Language skills or competence in a European language.
We welcome applications from individuals who are keen to adopt a new challenge. Please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Permanent |
| Contract Length |
|
N/A |
| Start Date |
|
|
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
CNC Programmer, Settler, Operator |
| Location |
|
Surrey |
| Job Number |
|
107746564 |
| Posted |
|
08/02/2012 (14:37) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem are currently working on behalf of an international racing team to recruit and experienced CNC Machine, tool programmer, Setter, Operator to join their expanding team. The purpose of the role is to program, set and operate multi-axis computer numerically controlled machine centres and tools to make race car components from supplied drawings. You will be able to liaise with the production management and maintain shift handovers with other shift employees within the machine shop.
The suitable candidate must be able to demonstrate their excellent knowledge of programming, setting and operating, using Heidenhain lathes, milling and have a proven track record with machining precision components. Ideally you will have come from a motorsport environment or similar. In addition you will have knowledge of ISO and conversational Computer Numerical Controlled machinery.
The working hours are: Fri - Sat: 06:00 - 19:00
Sun 06:00 - 20:00
In addition to these hours, overtime is readily available and encouraged. This is a Permanent position looking to start the suitable CNC Machinist as soon as possible.
To apply please contact Sally Wilson on 01903 276750 or via email with a CV
|
| Job Type |
|
Permanent |
| Contract Length |
|
N/A |
| Start Date |
|
02/03/2012 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
CAE Analyst |
| Salary/rate |
|
£0 - £30.19/hour |
| Location |
|
Warwickshire |
| Job Number |
|
104229124 |
| Posted |
|
07/02/2012 (16:19) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem is looking for CAE Analyst. Contracts until 31/03/12 on offer paying Limited company rate of £30.19 per hour based in Warwickshire.
Customer Order Number 20857
Position Description:
*CAE analysis: stress dynamic analysis of components and subsystems using mathematical modelling techniques.
*Use CAE techniques for verifying, optimising design for durability, NVH, Vehicle dynamics and safety requirements.
*Develop analytical methods.
Skills Required:
*Ability to use relevant software packages for simulation and modelling.
*Able to produce reports with proposed solutions.
*Proven CAE analysis experience in the automotive or related sector.
Experience Required:
Previous experience within relevant field, computer literate.
Education Required:
Candidates must have a minimum of HNC/HND in relevant field, ideally educated to Degree level.
We are keen to discuss your interests and future plans, please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Contract |
| Contract Length |
|
9 Weeks |
| Start Date |
|
30/01/2012 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Electrical Engineer - Test |
| Salary/rate |
|
£0 - £20.35/hour |
| Location |
|
Warwickshire |
| Job Number |
|
104229118 |
| Posted |
|
07/02/2012 (15:59) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem is looking for an Electrical Engineer focusing on Testing. Contracts until 31/12/12 on offer paying Limited company rate of £20.35 per hour based in the Midlands.
Customer Order Number 20067
Position Description:
*Conduct vehicle level low voltage tests using ADD2, Nicolet Vision and other electrical measurement equipment.
*Gather data and report out on vehicle LVT status Generation of test reports
*Ensure Test Equipment complies with calibration requirements
*Support In house equipment maintenance
*Support vehicle level low voltage test issue resolution
*Interface with internal customers and data suppliers
*Raise AIMs when required Load/maintain EFDVS with programme test requirements
*Loading of reports to database
Skills Required:
*Good communication skills - both written and verbal
*An ability to analyse problems, identify potential cause.
*The commitment / enthusiasm to deliver quality results in a flexible and dynamic team environment Able to work within a small team of experienced vehicle test engineers.
Skills Preferred:
Vehicle Electrical systems and testing
Experience Required:
*Good practical skills e.g. apprentice trained
*Knowledge of vehicle electrical/electronics at a system level
Experience Preferred:
Vehicle Electrical systems and testing
Education Required:
ONC/HNC or similar in electrical engineering, preferably automotive/low voltage based.
We are keen to discuss your interests and future plans, please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Contract |
| Contract Length |
|
80 Weeks |
| Start Date |
|
20/09/2011 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Project Engineer - Body |
| Salary/rate |
|
£0 - £22.35/hour |
| Location |
|
Warwickshire |
| Job Number |
|
104229100 |
| Posted |
|
07/02/2012 (14:52) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem is looking for a Project Engineer - Body. Contracts until 31/12/12 on offer paying Limited company rate of £22.35 per hour based in Warwickshire.
Customer Order Number 21655.
POSITION DESCRIPTION:
Project Engineer to lead and co-ordinate process improvement actions for Body Engineering.
SKILLS REQUIRED:
Highly competent with Microsoft Office tools (Excel, Word, PowerPoint) and have:
*Excellent interpersonal skills
*An ability to work to tight deadlines with often conflicting demands
*An ability to interrogate complex data
*Any person supplied should have a valid UK driving licence and meet the medical requirements of the client.
SKILLS PREFERRED:
*Knowledge of Body Engineering systems and commodities
*Working knowledge of project delivery processes; GPDS / FPDS / PPAP
*Working knowledge of change management processes; AIMS, WERS, PACN
*Working knowledge of IT systems and tools
*Problem solving tools such as 8D, Six Sigma, DMAICR.
EXPERIENCE REQUIRED:
Successful history of project management, ideally within the automotive sector
EDUCATION REQUIRED:
Ideally degree educated.
We are keen to discuss your interests and future plans, please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Contract |
| Contract Length |
|
55 Weeks |
| Start Date |
|
12/12/2011 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Maintenance Engineer |
| Location |
|
Crewe, Cheshire |
| Job Number |
|
107745901 |
| Posted |
|
07/02/2012 (12:01) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem are working on behalf of a well established High Performance Luxury Car Manufacturer to recruit a skilled Maintenance Engineer to assist the maintenance teams in diagnosing and repairing a wide range of complex equipment. In addition you will assist with the procurement of new equipment and developing improved maintenance preventative methods and techniques.
You will be supporting the maintenance teams with breakdowns, investigating and carrying out modifications on equipment - Electrical, Mechanical or PLC, condition based monitoring, continuous improvement activities, service contract specification and procurement, project management, and developing and implementing standards.
Successful applicants will have a minimum HNC/HND in an engineering discipline and suitable maintenance experience in a similar production environment.
You should be a self motivated team player with good communication skills, required by work cross functionally you will promote innovative ideas and lead projects on behalf of the maintenance function. The suitable candidate should also have an open flexible approach will help to solve complex technical problems from first principles often under pressure and at times working in difficult environments.
For more information and to apply for this position please contact Sally at Assystem on 01903 276747 alternatively you can forward your CV directly
|
| Job Type |
|
Permanent |
| Contract Length |
|
N/A |
| Start Date |
|
02/04/2012 |
| Contact Details |
|
|
|
|
|
|
| Job Title |
|
Clay Modeller |
| Salary/rate |
|
£0 - £23.26/annum |
| Location |
|
Essex |
| Job Number |
|
104229059 |
| Posted |
|
07/02/2012 (11:37) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem is looking for a Clay Modeller. Contracts until 31/12/12 on offer paying Limited company rate of £23.26 per hour based in Essex.
Customer Order Number 38308
Position Description:
Produce Scale or full size interior and exterior clay models from Instruction/images supplied by designer.
Skills Required:
Able to model in clay to a very high standard
Experience required:
Previous experience in a similar role is desirable.
Experience in the automotive industry is preferable.
Fully competent at all levels of complexity
We are keen to discuss your interests and future plans, please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757
|
| Job Type |
|
Permanent |
| Contract Length |
|
48 Weeks |
| Start Date |
|
31/01/2012 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Project Engineer Chassis |
| Location |
|
South East England, South East |
| Job Number |
|
104229053 |
| Posted |
|
07/02/2012 (11:23) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem in the UK are currently working very closely with a Niche Vehicle Manufacturer who is expanding its team, our client requires a Project Engineer - Chassis to join their team. The successful candidate will report directly to the Chassis Manager. The position is permanent and based in the South of England.
Purpose of the Role:
Project management of Chassis Systems to meet project targets for performance, cost, timing and weight on new vehicles.
Principal Accountabilities:
*Manage delivery of components and component systems from concept to SOP + 90 days
*Liaise with Analysis / Test Teams to meet project targets
*Responsible for cost - piece price and investment, quality and timing of components
*Manage cross functional team including designers, buyers, manufacturing engineers in order to achieve above
Knowledge, Skills and Experience:
*Strong experience of OEM or tier one component delivery
*Management of component delivery within a APQP or six sigma or similar framework, including FMEA, component planning and PPAP
*Proven leadership of an engineering team
*Management of supplier commercial contracts and deliverables
*Catia V5 literate
*Mechanical or Automotive Engineering Degree 2:1 or above
*Chartered Engineer
*PRINCE or similar project management qualifications useful
*Background in low volume, high performance sports or racing cars preferred
Personal Attributes:
*Delivery focused, with demonstrable track record of on-time delivery
*Self motivated to deliver excellence
*Strong communication skills
*Ability to motivate and gain respect
All employees must ensure compliance with the Company Health and Safety Policy, and all relevant other statutory Health and Safety legislation.
We welcome applications from individuals who are keen to adopt a new challenge. Please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Permanent |
| Contract Length |
|
N/A |
| Start Date |
|
17/11/2011 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Manufacturing & Final Process Engineer |
| Salary/rate |
|
£0 - £21.42/hour |
| Location |
|
Warwickshire |
| Job Number |
|
104229043 |
| Posted |
|
07/02/2012 (10:52) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem is looking for a Manufacturing & Final Process Engineer. Contracts until 31/12/11 on offer paying Limited company rate of £21.42 per hour based in Warwickshire.
Customer Order Number 20806
Position Description:
Trim & Final Process Engineer, Advanced Manufacturing Engineering
Skills Required:
*Planning, developing and implementation of all written processes for manufacturing, for new model introduction and model year changes.
*Build process strategy for manufacturing.
*Supplier selection and vendor management.
*Feasibility of all designs to suit manufacturing build requirements.
*Planning, developing and implementation of all tooling and jigs and fixtures for manufacturing, for new model introduction and model year changes.
*Process Capability of all processes and equipment, including Dimensional Management applications.
*Application of Lean Manufacturing and Design principles.
*Quality Planning and Analysis for Manufacturing.
*Involvement in the sections work through development and monitoring of timing plans.
*Ensure team adherence to ISR deliverables.
*Manage technical issues and escalate where appropriate.
*Attend programme meetings at all levels and present where applicable.
*Contribute in the development and submission of departmental responses to APQP, PDL's, Master Schedules, etc.
*Support and lead virtual build events raising and managing issues where appropriate.
*Support physical builds at Assembly Plant locations, raising and managing issues where appropriate.
Skills Preferred:
Knowledge of GSPAS and WERS applications
Experience Required:
Minimum 2 years manufacturing experience.
Experience Preferred:
Within the company's business, particularly in Trim & Final environment.
Education Required:
Candidates with essential skills will be considered.
Education Preferred:
HNC/HND or Relevant Manufacturing Engineering Degree
We are keen to discuss your interests and future plans, please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Contract |
| Contract Length |
|
N/A |
| Start Date |
|
31/10/2011 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Project/Test Engineer (Safety Systems) |
| Salary/rate |
|
£0 - £25.64/annum |
| Location |
|
Warwickshire |
| Job Number |
|
104229012 |
| Posted |
|
07/02/2012 (09:01) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem is looking for a Project/Test Engineer (Safety Systems). Contracts until 31/03/13 on offer paying Limited company rate of £25.64 per hour based in Warwickshire.
Customer Order Number 22071.
Position Description:
Project / Test Engineer for Safety Component Systems for forward model programmes.
To facilitate the parts processing of the test facility, data capture, test analysis & report completion.
Skills Required:
*Proven Project Management capability
*Knowledge of automotive Test and Development processes
*Excellent communications skills. Demonstrated ability to communicate at all levels
*PC Literacy; Microsoft Project, Power Point, Excel, Word etc.
*Any person supplied should have a valid UK driving licence and meet the medical requirements of the company.
Skills Preferred:
Knowledge of Body Engineering and specifically Safety Components design, function, performance, production & manufacturing requirements.
Working knowledge of project delivery processes; GPDS / FPDS / PPAP / eFDVS
Working knowledge of change management processes; AIMS, WERS"
Experience Required:
Successful history of project management delivery.
Experience Preferred:
Ideally within the automotive sector or adjacent industries, eg rail, aerospace, defence, energy etc.
Education Required:
Ideally degree educated.
We are keen to discuss your interests and future plans, please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Contract |
| Contract Length |
|
59 Weeks |
| Start Date |
|
07/02/2012 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
FE Analysis Engineer - Crash |
| Location |
|
Surrey |
| Job Number |
|
104228860 |
| Posted |
|
06/02/2012 (11:03) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem in the UK are currently working very closely with a Niche Vehicle Manufacturer who is expanding, our client requires a FE Analysis Engineer - Crash to join their team. The position is permanent and based in the South of England.
Vacancy Description Purpose of the Role:
The engineer will be responsible for maintaining, analysing and reporting on vehicle, system and component FE models.
Role Dimensions:
The engineer will report directly to the analysis manager and liaise with various function groups and attribute managers. The candidate will be required to communicate progress and critical issues to the Project Engineers and the Chief Designer
Principal Accountabilities:
The engineer will be responsible for maintaining, analysing and reporting on the vehicle, system and component models. Models will be used to study performance against targets relating to Crash/Safety, Durability and NVH.
Engineer will work with project engineers to assess risk on new projects and develop plans to manage this risk thought virtual and physical test activities.
Understanding of the model performance and analysis of test data and basic engineering principles, will allow the engineer to develop robust models to assist the design and development activities of the vehicle program.
The engineer should determine the most efficient engineering techniques, to deliver maximum value to program through an optimised modelling approach. Alongside supporting vehicle programs, the engineer should draw on team experience of best practice and help develop methods to improve group capabilities.
Experience of metallic and composite materials is required as the vehicle structure uses both. Knowledge of various vehicle systems is desirable.
Predictive analysis should be complete prior to all physical testing.
Knowledge, Skills and Experience:
The engineer should have extensive experience developing and analysing full vehicle, component and system level models
Personal Attributes:
*Working knowledge of current legal standards and directives.
*Advanced problem solving abilities
*Good organizational skills
*Ability to communicate at all levels
*Team player
*Flexible attitude to working hours
To apply for this position, candidates must be eligible to live and work in the UK
We welcome applications from individuals who are keen to adopt a new challenge. Please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Permanent |
| Contract Length |
|
N/A |
| Start Date |
|
06/02/2012 |
| Contact Details |
|
|
|
|
|
|
| Job Title |
|
Manufacturing Engineer - BIW |
| Salary/rate |
|
£0 - £38.42/annum |
| Location |
|
Merseyside |
| Job Number |
|
104228673 |
| Posted |
|
03/02/2012 (13:37) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem is looking for a Manufacturing Engineer - BIW. Contracts until 31/10/12 on offer paying Limited company rate of £38.42 per hour based in Merseyside.
Customer Order Number 22007
Skills Required:
Basic PC Skills, Automotive, Project Management, Automation and Body In White
Experience Required:
Automotive Systems
Experience Preferred:
BIW
Education Required:
Engineering Degree preferred
Additional Information:
40-50 hrs a week
We are keen to discuss your interests and future plans, please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Contract |
| Contract Length |
|
39 Weeks |
| Start Date |
|
03/02/2012 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Senior CAD Engineer - Packaging |
| Salary/rate |
|
£0 - £26.77/hour |
| Location |
|
Warwickshire |
| Job Number |
|
104228667 |
| Posted |
|
03/02/2012 (13:06) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem is looking for a Senior CAD Engineer - Packaging. Contracts until 31/03/13 on offer paying Limited company rate of £26.77 per hour based in Warwickshire.
Customer Order Number 22034
Position Description:
Vehicle Package Engineer reporting to Vehicle Package team leader.
Skills Required:
*Catia V5.
*Proven negotiation skills.
*Any person supplied should have a valid UK driving licence and meet the medical requirements of the company
*Complex Cross function Problem resolution
Skills Preferred:
Working knowledge of the company's project delivery process
GPDS
Working knowledge of Teamcentre Tce
Experience Required:
Extensive Package experience
Extensive Mechanical or Body/Interior component design experience
Experience Preferred:
Experience of managing own workload preferred.
Education Required:
HND
Education Preferred:
Degree
Additional Information:
The role is responsible for the Creation, Development and Analysis of Vehicle and System level layouts, investigations and issue resolutions. Candidates must be used to working in dynamic cross functional teams, be skilled in problem resolution and be highly motivated. They will be located in Warwickshire as part of a team of Vehicle Package Engineers.
We are keen to discuss your interests and future plans, please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Contract |
| Contract Length |
|
61 Weeks |
| Start Date |
|
03/02/2012 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
Automotive BOM Analyst |
| Salary/rate |
|
£0 - £16.33/hour |
| Location |
|
Warwickshire |
| Job Number |
|
104228550 |
| Posted |
|
02/02/2012 (17:04) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem is looking for an Automotive BOM Analyst. Contracts until 11/05/2012 on offer paying Limited company rate of £16.33 per hour based in Warwickshire.
Customer Order Number 20070
Position Description:
*Manage bills of material and issue schedules across the company's entire prototype build phases by program.
*Manage Inventory between programs.
*Support Material Control activities at build sites.
*Manage leftover stock at the end of build phases.
Skills Required:
*PC literate (inc Specification, Procurement, Scheduling and Inventory Control).
*Ability to communicate well at all levels, written and verbally.
Process Responsibilities
*Managing all GPIRS derived Bill of Materials
*Place GPIRS schedules in line with the WIPS blanket orders.
*Manage Inventory between programs
*Obtain from bought-out suppliers delivery promise dates for each GPIRS release.
*Resolve all GPIRS impounds in line with FM and GAO requirements.
*Support Material Control activities at build sites.
*Manage leftover stock at the end of build phases and report out value.
*Close and report out on all outstanding GPIRS Engineering RPS's.
Experience Required:
Sound knowledge of Material Control & Physical Builds from within Motor Manufacturing.
Experience Preferred:
Understanding of Prototype Motor Manufacturing Methods.
Education Required:
Good standard of Education and / or suitable experience in related Business area.
Education Preferred:
Additional Information:
Business systems & processes:
*GPIRS
*WERS
*STAMPS
*CMSS 3
*Data analysis & reporting e.g. PTIS
WIPS Key interfaces:
*MP&L Prototype Logistics
*Product Development
*Prototype Operations
*Pilot Plant N.M.P
*Programme Teams
*Purchase
*Suppliers Key Meeting Cadence
*PST Support
*Timing PAT Support
*Build Planning Meetings Support
*LMM Support
*Part Status Meetings Chair
*Greenlist (change control) Support
*Build/Programme Start-up meetings Support
*PPPM Master Schedule Review (monthly) Support
Stores Location & Scheduling Reviews (fortnightly) Chair Key Performance Indicators:
*Weekly Executive Status Sheets
*PTIS reporting
*Impound Reports and Metrics
*Pre-production Material Planning Metrics
*
We are keen to discuss your interests and future plans, please register your interest by sending a CV and short covering email or contact Angela Marraner on 01903 276757.
|
| Job Type |
|
Contract |
| Contract Length |
|
9 Weeks |
| Start Date |
|
02/02/2012 |
| Contact Details |
|
|
|
|
|
|
|
| Job Title |
|
CNC Programmer, Settler, Operator |
| Location |
|
South East England, South East |
| Job Number |
|
104228536 |
| Posted |
|
02/02/2012 (16:43) |
| Agency/Employer |
|
Assystem UK Ltd |
| Description
|
|
Assystem are currently working on behalf of an international racing team to recruit and experienced CNC Machine, tool programmer, Setter, Operator to join their expanding team. The purpose of the role is to program, set and operate multi-axis computer numerically controlled machine centres and tools to make race car components from supplied drawings. You will be able to liaise with the production management and maintain shift handovers with other shift employees within the machine shop.
The suitable candidate must be able to demonstrate their excellent knowledge of programming, turning - milling and live tooling of Mazak / Mazatrol machines and have a proven track record with machining precision components. Ideally you will have come from a motorsport environment or similar. In addition you will have knowledge of ISO and conversational Computer Numerical Controlled machinery.
The working hours are: Fri - Sat: 06:00 - 19:00
Sun: 06:00 - 20:00
In addition to these hours, overtime is readily available and encouraged. This is a Permanent position looking to start the suitable CNC Machinist as soon as possible.
To apply please contact Sally Wilson on 01903 276750 or via email with a CV
|
| Job Type |
|
Permanent |
| Contract Length |
|
N/A |
| Start Date |
|
02/03/2012 |
| Contact Details |
|
|
|
|
|
|
