| Job Title |
Delivery/Logistics/Transport Coordinator |
| Location |
Reading, Berkshire |
| Job Number |
122211707 |
| Posted |
17/03/2010 (15:25) |
| Agency/Employer |
Sitec Group |
Description
|
Our client a nuclear MoD establishment in Reading, are looking to recruit a Security Cleared Delivery Co-ordinator on a contract basis paying hourly.
For security reasons personnel fulfilling this role will need a current valid security clearance for which purpose you will need to be a British National and hold a UK Passport.
ROLE DESCRIPTION
To ensure all deliveries are received and processed in a manner that minimises delays and effectively corresponds with the contractors required expectations.
KEY RESPONSIBILITIES/ACCOUNTABILITIES
· At all times comply with H&S Policy and Procedures whilst undertaking your duties, and ensuring that all delivering vehicles and operatives meet all required safety standards.
· Check the work environment for safety, following safe working practices at all times.
· Ensure correct PPE is worn at all times by search bay operatives, visitors and delivery drivers within the inspection area and advise as to the site PPE requirements.
· Identify the destination of each delivery as it arrives.
· Determining the priority of each delivery e.g. Concrete pours.
· Organising the vehicle search by Chubb guards in order of priority.
· Contacting the appropriate contractor to ensure the material is expected and arranging an escort for the delivery at the site gates.
· Liaising with the security staff to ensure there are no unseen delays at the site gates.
· Develop good working relationships with all site personnel to ensure co-operation to allow successful deliveries.
· Ensuring pick-up of equipment and material from the sites is organised in advance and the contractors have made preparation for the arrival of the contracted vehicle.
· Consistently determining if there are better ways of improving delivery efficiency to the sites.
· Carry out any other tasks related to site deliveries, as required by the Logistics Manager.
QUALIFICATIONS
· CSCS Qualification or Equivalent
· Driving License
· IT Literate
KNOWLEDGE
· Good understanding of working within delivery environment
· General Knowledge of UK Health & Safety Legislation
· Good understanding of Company Safety, Quality and Security Procedures
· Good knowledge of supply management.
SKILLS
· Ability to build effective internal and external working relationships
· Providing leadership and Motivation/influence when required.
· Ability to make systematic rational judgements in problem solving
· Ability to produce and analyse accurate figures relating to all aspects of site deliveries.
EXPERIENCE
· Experience of working within a transport/delivery/logistics environment
· Experience Safe Methods of Work, Risk Assessments and Traffic Management Plans.
· Experience with safe loading/unloading and transporting of materials.
|
| Job Type |
Contract |
| Contract Length |
Contract |
| Start Date |
ASAP Subject to |
| Contact Details |
 |
|
|
|
| Job Title |
Mechanical Engineer Tooling & Auxiliary Equipment & Lifting |
| Salary/rate |
£35 - £50/hour £35-50.00 per hour |
| Location |
Reading, Berkshire |
| Job Number |
107511801 |
| Posted |
15/03/2010 (16:14) |
| Agency/Employer |
Sitec Group |
| Description
|
Our client a nuclear MoD establishment in Reading, are looking to recruit DV Cleared Mechanical Engineers (to focus on Tooling and Auxiliary Equipment) & (Lifting) on a contract basis paying hourly up to £50.00 per hour depending on experience.
For security reasons personnel fulfilling this role will need a current valid security clearance for which purpose you will need to be a British National and hold a UK Passport.
Job/Role Purpose:
1) On a daily basis, undertake mechanical engineering design tasks as allocated by Engineering Managers/Senior Engineering Manager/Lead Engineer - Mechanical and deliver appropriate designs to agreed time, cost and quality requirements.
2) Contribute to inter-disciplinary design co-ordination and to project support activities including routine team liaison, reporting and activity planning.
3) As required, and as called for via the Lead Engineer – Mechanical, gain advice and approvals from the Facility Design Authority, Mechanical.
4) Maintain active liaison with all Stakeholders.
Key Accountabilities:
· Generation of appropriate design deliverables in line with agreed schedules [and in accordance with all known and applicable requirements such as legislation, best practice, recognised public Standards, Client Standards and the Client Quality System and its supporting documents such as OPs and WIs and with client’s SQESH expectations]
· Contribution to inter-discipline tasks such as document checks and reviews, and inter-discipline support/liaison [involving assistance/input to other design disciplines, active contribution to project team discussions/meetings].
· Active liaison with relevant Design Authority specialists to obtain formal and informal support and approvals [involving contact with Head of Discipline, Mechanical, within the Facility Design Authority and others such as the Mechanical Legislative Champions].
· Timely support to administrative requirements [weekly timesheets, personal training/compliance records, progress reporting, input to work planning, etc.]
Key Responsibilities:
· Correct application of client’s document systems, including relevant EDMS applications, to generate design deliverables within mechanical scope and for inter-disciplinary review tasks.
· Correct use of sources of reference and direction, such as client’s Standards and other Technical Information Services (via Library etc.), client’s Quality System and its associated OPs, WIs and Guidance documents, the Safety Manual, Design Safety Principles, Engineering Mandatory Elements, etc.
· Inclusion of Design Authority personnel and other Stakeholders for defined inputs, formal checks/approvals.
· Support for the correct use of CAD methodology to generate CAD deliverables, but with most CAD input achieved through the support of CAD specialists.
· Attendance at and pro-active input into project and engineering group meetings and discussions/reviews.
· Support to project scheduling, progress reporting and review and project modelling activities and documents, as required.
· Completion of timesheet each week.
Completion and maintenance of required training and associated records
Qualifications:
· Degree or equivalent in Mechanical Engineering, or other Technical discipline if supporting knowledge and experience supports required expertise and intended areas of work.
· Chartered status preferred.
Knowledge:
· Overall knowledge of the mechanical engineering needs of technically complex and highly regulated major projects, at a working level of detail, to allow suitable design and deliverable development. Working knowledge of JSP 467 would be an advantage.
· Overall knowledge of design co-ordination methods and pro-active facilitation methods for complex and demanding, high risk process facilities
· Technical knowledge consistent with the grade of position in a mechanical engineering role.
· Working knowledge of CAD methodology and other applications (as listed in ‘skills’ section and qualified in ‘experience’ section).
· Awareness of work scoping and planning principles for future activities.
· Basic awareness of Project Management systems for study/project scheduling of engineering activities, focussed on detailed planning and reporting own work in terms of progress and schedule
· Basic understanding of budget systems within a project-oriented delivery context, for personal productivity tracking and for projects and overhead use
· User-level knowledge of client training system/record system (“Oracle” based)
Experience:
· A well developed experience of industrial/applied design engineering methodology including ‘design from first principles’ as well as ‘packaged’ or specialist scope within an overall design.
· Strong experience focus in mechanical engineering, along with its interfacing into all other disciplines.
· Experience in design for manufacture and appreciation of manufacturing methods and experience in design justification, to an appropriate standard.
· Experience in stress analysis techniques, seismic and fault conditions
· Experience of integration of Safety and Assurance into design, including HAZID, HAZOPs and safety justification of designs.
· Good experience of the associated design interfaces with capital estimating and procurement, and associated communication/implementation systems such as Enquiry, Tender Assessment, Design Document Review, etc.
· Broad experience in relevant legislation and the use of additional (e.g. Company-level) Standards
· Working experience in direct use of CAD within a complex project environment (but note that CAD work is not the prime focus of this position).
· Working experience of contributing to team work and its planning/reporting within multi-discipline project teams, including project/scheduling interfaces
· Basic experience of risk management techniques
Skills:
· Working familiarity with Microsoft Office “Word”, “Excel” and “PowerPoint” applications, and preferably with “Visio”.
· Awareness of client’s preferred CAD applications.
· Ability to interpret and give technical input into scheduling activities (“Primavera” format is client’s standard application; administration by other specialists).
· Good inter-personal skills and established team-based work methodology, with a focus on design integration and co-ordination.
Behaviours:
· Proactive, efficient, thorough.
· High levels of initiative, literacy and accuracy.
· Strong use of approved methodology, but with suitable appropriateness.
· Good communication skills at all levels.
· A strong team builder and able and inclined to coach others into best practices.
Special Requirements:
There is an immediate and ongoing need for this role to fulfil activities requiring DV clearance.
|
| Job Type |
Contract |
| Contract Length |
Contract |
| Start Date |
ASAP Subject to |
| Contact Details |
|
|
|
|
| Job Title |
Project Engineer |
| Salary/rate |
£35 - £45/hour |
| Location |
Fawley, Southampton, Hants, Hampshire |
| Job Number |
107510701 |
| Posted |
11/03/2010 (16:29) |
| Agency/Employer |
Sitec Group |
| Description
|
Our client (based at the Fawley Refinery) requires a Project Engineer (Mech/Piping) to deliver on array of installation projects from 'craddle to grave'. (Value 2-5 million)
This is a long term Contract position (initially 12 months) paying £35- 45ph, LTD.
Candidates should ideally have a Project Engineering background in the management of Refinery and/or Chemical Plant engineering and construction projects.
The candidate should have worked with all types of engineering and construction contracts and should have experience of controls management of contract administration, costs and schedule.
The candidate should be comfortable with reviewing and understanding all types of specifications and drawings, and should have experience of quality control processes.
The role will include the following tasks:
Participate in reviews of basic process and mechanical design specifications.
Review cost estimates.
Develop execution strategies and contract strategies, contractibility plans and produce overall project execution and quality assurance plans.
Co-ordinate the production of mechanical equipment specifications with input from design engineers and develops procurement requisitions.
Monitor the equipment procurement process through to site delivery.
Review detailed in-house design engineering & documentation and ensure reviews by client plant-based personnel cover safety, operability, and maintainability.
Lead construction planning and preparation reviews.
Develop and document site construction work scopes based on engineering packages.
Review the work in progress to ensure safety.
Review total project progress and produce simple monthly reports.
Work with an assigned cost control engineer to monitor project costs and forecasts.
I look forward to hearing from you.
|
| Job Type |
Contract |
| Contract Length |
Initally 12 months |
| Start Date |
April |
| Contact Details |
|
|
|
|
| Job Title |
Senior Engineering Manager |
| Salary/rate |
£45 - £55/hour Depending on experience |
| Location |
Reading, Berkshire |
| Job Number |
107510908 |
| Posted |
11/03/2010 (10:00) |
| Agency/Employer |
Sitec Group |
| Description
|
Our client a Nuclear MoD Establishment based in Berkshire is urgently looking to recruit a Senior Engineering Manager on a contract basis to start ASAP.
Job/Role Purpose
A key member of the project management team with responsibility for Engineering & Design of the project, including technical management of design service providers and liaison with Assurance and other members of the project team.
Key Responsibilities
* Ensuring that Engineering solutions meet business needs
* Accepting the Design as the Delegated Design Authority
Accepting the design requires that the SEM:
* Ensures that an appropriate and signed off Design Control Plan is in place
* Ensures that the design is adequately scoped, briefed and executed
* Ensures that Design Review is carried out to the appropriate level in accordance with OP107
* Sign off the appropriate Design Certificates in accordance with WI-101-07
Additional Responsibilities
* Ensuring that Engineering Managers are suitably Experienced and Qualified for their roles.
* Assisting and mentoring Engineering Managers in the performance of their duties.
* Monitoring and auditing the performance of Engineering Managers against their defined roles and responsibilities.
* Managing engineering solutions which fully comply with all Company and UK legal requirements together with Company business case needs
Qualifications
A Chartered Professional of an appropriate professional Engineering Institution (e.g. Institution of Civil/Structural Engineers)
Knowledge
* Working knowledge of design process and management of the design process for both conventional and high hazard facilities.
* A good understanding of the technical standards and regulatory requirements for construction appropriate to conventional and hazardous environments.
* Knowledge of contracts and specifications.
* Understanding of the influences of design on the commissioning, operation and maintenance of a facility.
* Knowledge of the New Engineering Contract and National Building Specification
Experience
* Extensive experience in the management of engineering design delivery including high hazard facilities.
* Wide knowledge in contracting implementation strategies and the integration of design into those strategies.
* Broad experience in the leadership of teams and management of staff
Candidates applying must be aware that a DV Clearance is required for this role before commencing work.
|
| Job Type |
Contract |
| Contract Length |
1 year to begin with |
| Start Date |
ASAP |
| Contact Details |
|
|
|
|
| Job Title |
Safety Case Engineer / Safety Case Author |
| Location |
Reading, Berkshire |
| Job Number |
107510911 |
| Posted |
11/03/2010 (09:26) |
| Agency/Employer |
Sitec Group |
| Description
|
Our Client a Nuclear MoD Establishment in Reading is currently looking to recruit a Safety Case Engineer/ Safety Case Author on a contract basis for the period of 1-2 years.
Job purpose
* Responsibility for ensuring the safety led design of the project ventilation systems including development of their specific safety functional requirements and ALARP justifications
* Development of fault trees associated with ventilation and containment failures
* Safety case support to buildings team on containment aspects
* Preparation of safety case sections
* Chairing of HAZOP meetings
* Meetings with NII
Essential experience
* 10 years nuclear safety case experience
* Engineering or relevant science degree
* Good report writing skills
* Nuclear risk assessment – including consequence analysis, design basis accident analysis and fault trees
* ALARP assessment
* HAZOP chairperson
Additional Desirable Criteria
* Experience of producing safety functional requirements
* Experience of classification of safety systems
* Safety assessment of nuclear ventilation systems
* Design substantiation experience
All candidates applying must be aware that a valid SC Clearance is required for this position.
|
| Job Type |
Contract |
| Contract Length |
1 - 2 years |
| Start Date |
ASAP |
| Contact Details |
|
|
|
|
| Job Title |
Technical Author, Technical Writer |
| Location |
Reading, Berkshire |
| Job Number |
107508689 |
| Posted |
11/03/2010 (09:01) |
| Agency/Employer |
Sitec Group |
| Description
|
Our client a Nuclear MoD Establishment in Reading is looking to recruit a DV Cleared Technical Author on a contract basis for 3 months.
Key Responsibilities
To ensure the production of a series of business cases in line with the project programme, or as directed by the Senior Project Manager.
Qualifications
Good technical background in the engineering aspects (easily picks up engineering concepts in Mechanical; Electrical and C&I preferably in an Radiologically contaminated Environment) preferably with experience in a nuclear environment. A recognized qualification in Engineering or Science would be of benefit.
Knowledge
Experience in writing technical documents, and business cases is essential
An understanding of project delivery would be of benefit
An understanding of business drivers would be of benefit
An understanding of production environment would be of benefit
Skills
Excellent written communication and very organised
Good oral communication and good interactive skills
Excellent understanding of Microsoft Office software
Easily picks up engineering concepts in Mechanical; Electrical and C&I preferably in an Radiologically contaminated Environment
Special Requirements
Must hold full DV clearance
Must be available for immediate start for a short term contract of three months
|
| Job Type |
Contract |
| Contract Length |
3month contract |
| Start Date |
ASAP |
| Contact Details |
|
|
|
|
| Job Title |
Commissioning Engineer |
| Salary/rate |
£30 - £40/hour |
| Location |
Reading, Berkshire |
| Job Number |
107508693 |
| Posted |
11/03/2010 (08:59) |
| Agency/Employer |
Sitec Group |
| Description
|
Our client a nuclear MoD establishment in Reading, Berkshire is currently looking to recruit a DV Cleared Commissioning Engineer on a contract basis.
Job/Role Purpose
* Commissioning engineer carrying out factory acceptance testing, setting to work activities, site acceptance testing and inactive commissioning in accordance with relevant commissioning procedures
* To support main and sub-contractors in the commissioning of specialised equipment
* To attend/chair test and commissioning panel meetings, produce test documentation and reports to a high standard.
Key Accountabilities
* Undertake duties and responsibilities as a Commissioning Engineer as directed by the Commissioning Manager
* Review commissioning documentation for compliance with; specifications and user requirements; safety requirements; Legislation; Codes of Practice and good engineering principles
* Attendance at Design Reviews as the ‘commissioning’ representative for projects of a multi-discipline nature
Key Responsibilities
To provide commissioning support to projects in a safe and consistent manner in accordance with company procedures and site licence conditions.
Qualifications
* Professional qualification in an engineering discipline
* Relevant experience in commissioning (5 Years)
* Full member of an appropriate Institute (optional)
Knowledge
* Good understanding of electrical design / installation / testing / commissioning experience
* Familiar with site licence conditions
* Familiar with Nuclear operating instructions and work instructions for commissioning
* Familiar with design guides and commissioning requirements Legislation, standards and codes of practice
* Safety systems, practices and safety administration
* Work in commercial and industrial environments
Experience
Experienced in the commissioning of a wide verity of equipment.
Skills
* Computer literate, with experience in the use of Microsoft Office suite
* Possess excellent technical knowledge
* Good interpersonal skills with the ability to work constructively with people of all levels and disciplines.
* Good oral, written and presentational skills including ability to produce high standard safety documentation
|
| Job Type |
Contract |
| Contract Length |
1 yr rolling contrac |
| Start Date |
ASAP |
| Contact Details |
|
|
|
|
| Job Title |
Electrical Projects Design Engineer |
| Salary/rate |
£33/hour Up to £33.00 ph |
| Location |
Reading, Berkshire |
| Job Number |
107510607 |
| Posted |
10/03/2010 (09:43) |
| Agency/Employer |
Sitec Group |
| Description
|
Our client who are based on a nuclear MoD establishment in Reading, are looking to recruit a DV Cleared Electrical Projects Design Engineer on a contract basis paying up to £33.00 per hour.
For security reasons personnel fulfilling this role will need a current valid security clearance for which purpose you will need to be a British National and hold a UK Passport.
Requirements:
DV Cleared
Qualifications minimum HNC / C+G 'C' certificate
Experienced in:
Electrical Engineering Design to BS7671
Amtech Cable Calculation Software
Microsoft Office, Word, Excel, Outlook
Writing of Safe Systems of Work, Method Statements
Proficient use of Autocad and able to produce:
* Interconnection / termination drawings
* Traywork / cable route drawings
* Block cable diagrams
* Circuit Diagrams
* Arrangement Drawings
* Control panel drawings
* Wiring Diagrams
Ideally qualified with Inspection & Testing to C+G 2391
Able to do the following:
Manage Electrical Installation Projects
Work on there own initiative
Carry out site surveys and produce an electrical installation document
package
Willing to be flexible and support the project team in day to day
project activities
|
| Job Type |
Contract |
| Contract Length |
Contract |
| Start Date |
ASAP Subject to |
| Contact Details |
|
|
|
|
| Job Title |
Lead/Responsible Mechanical Engineer |
| Salary/rate |
£35 - £40/hour £35-40.00 ph |
| Location |
Reading, Berkshire |
| Job Number |
107510030 |
| Posted |
08/03/2010 (13:39) |
| Agency/Employer |
Sitec Group |
| Description
|
Our client a nuclear MoD establishment in Reading, Berkshire are looking to recruit an SC Cleared Lead/Responsible Mechanical Engineer on a contract basis paying circa £40.00 on an hourly basis.
For security reasons personnel fulfilling this role will need a current valid security clearance for which purpose you will need to be a British National and hold a UK Passport.
Job/Role Purpose:
The purpose of this role is to provide a single engineering focal point for the Control Account Manager and put in place and implement arrangements for complying with all engineering aspects of the Engineering and Assurance process map.
The role also encompasses providing Responsible Engineering resource Level 3 Mechanical.
Key Accountabilities:
· Provide the Commissioning Manager engineering input for the development of a comprehensive assembly and commissioning programme.
· Design service routes
· Design solutions resulting from designers risk assessment workshops
· Design for structural steel package 2
· Undertake factory acceptance and site works testing for structural steel
· Provide engineering input for manufacturing contracts
· Be point of contact for engineering systems.
· Oversee the HD design of the front end (RA201.00.45.17.10.01)
· Provide engineering input into development of method sheets
· Provide engineering input into development of operation and maintenance manuals
· Produce 2D CAD drawings as required by the team
· Development of 3D CAD Models to support designers risk assessments and development of assembly and commissioning sequence.
· Undertake quality inspections on the L3 manufacturing contract.
Qualifications
· Mechanical Engineering Degree or Equivalent
· Chartered Mechanical Engineer
Knowledge
· Extensive mechanical design knowledge
· Welding Standards / Non Destructive Evaluation / Quality Assurance / Quality Control
· Finite Element Analysis
· Pressure / Vacuum Systems
· Manufacturing Techniques / Methods
· Testing and Commissioning of C&I and Software Systems
· CDM
Experience
· Extensive mechanical design experience
· Manufacturing experience of specialist engineering equipment
· Welding – defining workmanship requirements and inspection
· Installation and commissioning of specialist engineering system
· CDM
· Analysing FEA results
· Experience of ensuring pressure vessels are manufactured to the appropriate standards
· Working as part of a large multidiscipline team
· Working with the crane code
· Design Review
· Experience of installing equipment using modern alignment tools
· Factory Acceptance Testing
· Design Management
Skills
Personal integrity – Should be professional and protect client’s interests.
Special Requirements
· Willingness to travel / spend time away from home
|
| Job Type |
Contract |
| Contract Length |
Contract |
| Start Date |
ASAP Subject to |
| Contact Details |
|
|
|
|
| Job Title |
Engineering Manager |
| Salary/rate |
£35 - £45/hour |
| Location |
Reading, Berkshire |
| Job Number |
107508692 |
| Posted |
02/03/2010 (14:40) |
| Agency/Employer |
Sitec Group |
| Description
|
Our client a nuclear MoD establishment in Reading, Berkshire are looking to recruit an SC Cleared Design Integration Engineering Manager on a contract basis paying circa £37.50-£47.50 per hour.
For security reasons personnel fulfilling this role will need a high level of security clearance for which purpose you will need to be a British National and hold a UK Passport.
Key Responsibilities:
Design Integration
· Definition and delivery of the Design Interface Management as defined in Design Interface Management Plan
· Management of the design interface records
· Project management and reporting of progress for Design Integration Tasks as indicated on the project schedule.
Support to SEM
· Management of Engineering Design Change Process
· Configuration management
· Management of the Project Plant Item List
· Project CAD management, strategy (via CAD Manager)
· Compliance management against corporate technical standards
· SQEP record management.
· Management of Design change control process.
· Line management of the common engineering functions, including:
o Facility ARM & throughput assessment (via the ARM & Throughput RE)
o Provision of operations management advice to SEM and project sponsor (via Ops adviser).
o Provision of ad-hoc CAD support to project.
· General line management duties
Qualifications:
· Degree in an appropriate Engineering Discipline or equivalent or other technical qualification with relevant experience
Knowledge:
· Undertaking design and configuration for the life of a project.
· Demonstrate an understanding of technical standards and regulatory requirements for data management
· Understanding the lifecycle of data to be used on the project
Experience:
· Working with design teams with a multidisciplinary engineering resource within either conventional or hazardous environments
· Experience of multi disciplinary projects
Skills:
· Good technical and management skills including problem solving and decision making
· Good oral, written and presentational skills with a particular aptitude for report, documentation and letter writing
· Good interpersonal and communication skills to ensure effective communication to all levels to both internal and external personnel
· Familiarity with standard office software including word processors, spreadsheets, e-mail, presentations and databases
|
| Job Type |
Contract |
| Contract Length |
1 yr rolling contrac |
| Start Date |
ASAP |
| Contact Details |
|
|
|
|
| Job Title |
Project Risk Manager |
| Salary/rate |
£45 - £55/hour Circa £55.00 ph |
| Location |
Reading, Berkshire |
| Job Number |
107508617 |
| Posted |
02/03/2010 (10:57) |
| Agency/Employer |
Sitec Group |
| Description
|
Our client a nuclear MoD establishment in Berkshire are looking to recruit an SC Cleared Project Risk Manager on a contract basis paying on an hourly basis circa £55.00 per hour.
For security reasons personnel fulfilling this role will need a current valid security clearance for which purpose you will need to be a British National and hold a UK Passport.
Job/Role Purpose
Delivering the risk management capability within project environments, including major, re-kits and infrastructure projects.
Key Accountabilities
· For implementing Project Risk Management policy, processes and procedures on projects
· For co-ordinating the flow of Risk information to ensure that interfaces within projects are effectively managed to optimise efficiencies
· For ensuring that all relevant personnel are aware of their risk responsibilities
· For maintaining the Integrated Risk Management system, which meets clients requirements
· For managing the database to capture and identify Project Risks
· For reporting the status of risk management to stakeholders
· For undertaking modelling of three point estimates, schedule and risk registers at each stage of the Project Delivery process in accordance with the Company Procedures and MoD requirements
· For facilitating the effective identification and management of Project Risks
Key Responsibilities
To ensure that I understand and apply my responsibilities with regard to the Company’s Environment, Health, Safety, Security and Quality Standards
· To work with and provide support for colleagues in Projects in the delivery of investment appraisal requirements.
· To work with others in the Project Environment to support the effective and efficient application of the Integrated Risk Management system
· To work with colleagues throughout and to share experiences and develop improvement opportunities for the Risk management function in the area of:
o Best practice processes, procedures, tools and techniques and mechanisms for their practical application
Qualifications
· HNC/HND or equivalent
· Risk Management qualification or membership of a relevant risk association/institution desirable
Knowledge
· Project risk management principles
· Project management principles
· Principles of best practice in project services including cost engineering, estimating, risk and value
· Risk management software particularly ARM, Predict and Pertmaster
Experience
· Previous experience of successfully leading, motivating and managing teams
· Significant experience in a project risk management environment
· Experience of risk analysis, including modelling of schedule, cost and risk
Skills
· Strong communication skills
· Self motivated
· High computer software literacy
· Facilitation skills
· Presentational skills
Behaviours
· Have a mature attitude with the ability to communicate at all levels within the company, MoD and contractors, both verbally and written
· Working as part of a team to deliver a broad set of objectives
· Output orientated with a pragmatic approach to problem solving
· Capable of inspiring respect from the team and associated stakeholders
· Readiness to make decisions, take the initiative and originate actions
· Respond positively and successfully to changes in demand, priorities and conditions
· Recognition and demonstration that safety, quality, environment and security are key to success
Special Requirements
· SC Level Security Clearance required
· Ultimately will require DV clearance
|
| Job Type |
Contract |
| Contract Length |
N/A |
| Start Date |
ASAP Subject to |
| Contact Details |
|
|
|
|
| Job Title |
Field Engineers |
| Salary/rate |
£32.30/annum £32.30, LTD |
| Location |
Hampshire |
| Job Number |
107506772 |
| Posted |
23/02/2010 (10:59) |
| Agency/Employer |
Sitec Group |
| Description
|
Our client, based at the Fawley Refinery in Hampshire is looking for experienced Petro Chem. Field Engineers for the following disciplines:
Piping, Steelwork, Towers & Vessels.
(This is to work on an array of Turnaround projects, acting as the client representitive)
OBJECTIVE:
To ensure all work assigned is actioned in a safe, efficient and cost effective manner, in order to meet high quality standards and the agreed plan.
PRINCIPLE TASKS/RESPONSIBILITIES
Review Worklist.
Attend planning meetings to ensure all engineering meets deadlines and report progress.
Identify and inspect access, de-insulation and temporary equipment.
Review method studies task risk assessments produced by execution contractor.
Participate in construction planning and preparation reviews.
Planning and preparation of work packs / work scopes.
Raise contracts and liase with contractor supervision.
Review and approve method statements and risk assessments.
Ensure co-ordination of contractor interfaces to meet priorities and job preparation steps.
Review and approve work permits.
Review the work in progress to ensure safety.
Review construction progress against plans.
Maintain a diary of construction events and resources.
Provide expertise to contractors.
Provide reports on engineering progress.
Audit quality.
After completion of projects ensure database is updated by Drawing Office (D.O.) to reflect construction.
Co-ordinate D.O. activity for as-built and record updates.
The client is adamant you must have experience in the Petro Chem. sector.
I look forward to hearing from you.
|
| Job Type |
Contract |
| Contract Length |
Initally 12 months |
| Start Date |
May 2010 |
| Contact Details |
|
|
|
|
|
